jaydm99
Head-Fier
- Joined
- Apr 2, 2017
- Posts
- 96
- Likes
- 125
It's not clogged. I already removed it few days after painting it. I know this because I have experienced driver flex on them (which doesn't happen on the ZS5).The issue with the ZS5 is that the nozzle mesh is glued into place, vs the peel and stick adhesive ring on the nozzle mesh like most IEMs.
Are you planning on glueing the mesh in place? If so, don't use superglue. Use microdrops of fast dry epoxy (applied with a sewing needle) or a few drops of Laser Bond UV glue (applied to the outside seam between the mesh and the outside edge of the nozzle are). Drops at 12 o clock, 3, 6, and 9 should be all that's needed.
On a related topic, it looks like the bass vents are coated/clogged with black paint. You can especially see it on the left IEM (the one with the missing mesh). Although it could be the lighting in the photo.
Last edited: