Android phones and USB DACs - Page 91

i tried a similar cable from Amazon, and it works fine in that it allows my T-Mobile s3 to connect to the headstreamer, but the charge indicator did not indicate charging when i connected an external battery .  unlike my other otg cable, though, this one allowed me to use my Audioquest Carbon USB cable - which does not make contact with the non-charging otg cable - little annoyances keep popping up

Quote:

Originally Posted by CZ Eddie 

 

There are straight cable and also three-way cables that add a charging plug. 

 

Here is a super-short straight one I tested as OK:

http://www.ebay.com/itm/290830362349?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

 

 

 

And here are three each of the three-way cables that also tested OK for me:

 

This one is more expensive but it's in the USA and arrived in just a couple days to my address in the USA:

http://www.ebay.com/itm/160912100776?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

 

 

 

These two are in China and took 2-3 weeks to arrive to my house in the USA:

http://www.ebay.com/itm/190710044655?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

 

http://www.ebay.com/itm/110975897418?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Much apreciated, bro.

Edit: the problem is to find some micro b to mini usb adapter..

So will using USB Audio Recoder PRO allow basically any PC/MAC compatible USB DAC to work on the Galaxy S3?
 

Quote:

Originally Posted by Grendelrt 

So will using USB Audio Recoder PRO allow basically any PC/MAC compatible USB DAC to work on the Galaxy S3?
 

Yes can confirm this .... I put together E17 Fiio with this config !

For the ones with a i9300 I have some decent news. I've found a ROM that looks just like AOSP but still has USB audio working. The only reason I stayed on stock was because of the usb audio but now we can have both!

http://forum.xda-developers.com/showthread.php?t=2052926

It has the latest XXELLC firmware with the Exynos fix.
 

Quote:

Originally Posted by headfinoob 


Try Pugoo from udsproducts.com, it is bomber. No adhesive or rubber bands for me. I am wondering if the E17 will work with that kernel. I don't have my Note 2 for a couple more weeks though.

Sent from my ADR6425LVW using Tapatalk 2

pugoo is sold out, and not available anywhere else that I can find....   bummer

Any adhesive type sheets pulls the plastic battery cover off the Note 2 and S3, assuming it's like those magic adhesive sheets.

Been searching for an answer everywhere, can't find a straight one, so I guess I'll just ask lol. 

So, from what I gather, if I have a stock, US version Samsung Galaxy s3, connect it with the 'charger' cord to a external DAC / AMP, say the iBasso 10, and plug my headphones into the DAC / AMP, it will work and I'll get that beautiful clean sound? 

Thanks!! :D 

Quote:

Originally Posted by akong 

Been searching for an answer everywhere, can't find a straight one, so I guess I'll just ask lol. 

So, from what I gather, if I have a stock, US version Samsung Galaxy s3, connect it with the 'charger' cord to a external DAC / AMP, say the iBasso 10, and plug my headphones into the DAC / AMP, it will work and I'll get that beautiful clean sound? 

Thanks!! :D 

I am also seeking an answer to Samsung Galaxy S3 (US, SPH-L710) compatibility in any degree... ROMs/kernals that work, needed steps for connection/use, what have you, for the FiiO E07K

Quote:

Originally Posted by akong 

Been searching for an answer everywhere, can't find a straight one, so I guess I'll just ask lol. 

So, from what I gather, if I have a stock, US version Samsung Galaxy s3, connect it with the 'charger' cord to a external DAC / AMP, say the iBasso 10, and plug my headphones into the DAC / AMP, it will work and I'll get that beautiful clean sound? 

Thanks!! :D 

Yes according to the following list of USB DAC reportedly working with the Galaxy S3:

http://www.head-fi.org/t/595071/android-phones-and-usb-dacs/1320#post_9038046

The cable, used to connect the Galaxy S3 to the iBasso 10 peripheral, should be tested with a simple USB peripheral like a USB mouse.

http://www.head-fi.org/t/595071/android-phones-and-usb-dacs/855#post_8873931

Quote:

Originally Posted by Supra Man 

I am also seeking an answer to Samsung Galaxy S3 (US, SPH-L710) compatibility in any degree... ROMs/kernals that work, needed steps for connection/use, what have you, for the FiiO E07K

"We have tested E07K do work as DAC for GALAXY S3 and Note 2, but there are few users reported that they can't make it work. so the official reply can not state as " compatible " with Galaxy S3 and Note 2."

[FiiO]

http://www.head-fi.org/t/628254/fiio-e18/15#post_8973799

You could select another USB DAC/amp, like the iBasso D-Zero, of the long list of USB DAC reportedly working with a stock Galalxy S3:

http://www.head-fi.org/t/595071/android-phones-and-usb-dacs/1320#post_9038046

An "Android USB OTG cable" is also provided in the D-Zero box by iBasso:

http://www.head-fi.org/t/595071/android-phones-and-usb-dacs/1335#post_9044972

Just plug & play!

Quote:

Originally Posted by stevenstefke 

Bought a Hifimediy usb dac to test since nobody seems to have tried this one yet. ( info )

Hooked it up to my sgs3 with an otg usb cable but it doesnt work.

The HiFimeDIY Sabre can interwork with a Galaxy S3 using the USB Audio Recorder PRO:

http://forum.xda-developers.com/showpost.php?p=36704343&postcount=75

http://hifimediy.com/index.php?route=product/product&product_id=83

Quote:

Originally Posted by CynicalMushroom 

For the ones with a i9300 I have some decent news. I've found a ROM that looks just like AOSP but still has USB audio working. The only reason I stayed on stock was because of the usb audio but now we can have both!

http://forum.xda-developers.com/showthread.php?t=2052926

 

It has the latest XXELLC firmware with the Exynos fix.
 

Here's another great option:

http://forum.xda-developers.com/showthread.php?t=2005845

It also allows for DPI tinkering along the lines of what Paranoid has.