RatFarm
100+ Head-Fier
- Joined
- May 12, 2007
- Posts
- 232
- Likes
- 87
Quote:
As with any INPUT or OUTPUT DC Blocker caps, quality is hugely important since the audio signal travels directly thru these caps. I would ditch any electrolytic cap and put a good poly film cap in this position if space allows. If not, then BlackGate or RubyCon Z Series caps would do best IMO.
Also, if an electrolytic cap is used then I wouldn't go any smaller than 22uF 16v. If poly then anything above 4uF is golden.
Originally Posted by yrh0413 /img/forum/go_quote.gif so swapping them with other better caps don't make a difference? |
As with any INPUT or OUTPUT DC Blocker caps, quality is hugely important since the audio signal travels directly thru these caps. I would ditch any electrolytic cap and put a good poly film cap in this position if space allows. If not, then BlackGate or RubyCon Z Series caps would do best IMO.
Also, if an electrolytic cap is used then I wouldn't go any smaller than 22uF 16v. If poly then anything above 4uF is golden.