Anton
New Head-Fier
- Joined
- Jun 12, 2004
- Posts
- 18
- Likes
- 0
Has anyone seen this before? Does anyone know what opamp they're using?
http://www.aptecpro.com/Xenos-Prod/X...ntro-page.html
These are the reported specs:
Input
Maximum input signal level............................................. ..........6.7V 10.5Hz – 40kHz
Input type..................................3.5mm stereo jack socket from headphone or line out
Input impedance (nominal)......................................... .............................20,000Ohm
Output
Output power / channel - batteries...............485mW RMS (970mW Peak) into 32Ohm
Output power / channel - AC adapter.........755mW RMS ( 1505mW Peak) into 32Ohm
(Output power is per channel)
Output type .....................................two 3.5mm stereo jack sockets for headphones
Dual headphones lowest impedance......................................... ..........16Ohms each
Headphone impedance range............................................. ..........16Ohm – 600Ohm
Audio Specifications
Frequency response.......................................... .....10.5Hz – 40,000Hz +0.3dB -3dB
Distortion and noise............................................0 .01% +/-0.001% 30kHz BW 0dBV
Power Sources
Batteries......................................... ...................4 x 1.2V AA NiMH or 1.5V Alkaline
AC Adapter....................................110 - 240VAC input, 9VDC 1.3A regulated output
Physical Dimensions
Inch / mm............................................6.3L x 3.56W x 1.68H / 160L x 90.5W x 43H
http://www.aptecpro.com/Xenos-Prod/X...ntro-page.html
These are the reported specs:
Input
Maximum input signal level............................................. ..........6.7V 10.5Hz – 40kHz
Input type..................................3.5mm stereo jack socket from headphone or line out
Input impedance (nominal)......................................... .............................20,000Ohm
Output
Output power / channel - batteries...............485mW RMS (970mW Peak) into 32Ohm
Output power / channel - AC adapter.........755mW RMS ( 1505mW Peak) into 32Ohm
(Output power is per channel)
Output type .....................................two 3.5mm stereo jack sockets for headphones
Dual headphones lowest impedance......................................... ..........16Ohms each
Headphone impedance range............................................. ..........16Ohm – 600Ohm
Audio Specifications
Frequency response.......................................... .....10.5Hz – 40,000Hz +0.3dB -3dB
Distortion and noise............................................0 .01% +/-0.001% 30kHz BW 0dBV
Power Sources
Batteries......................................... ...................4 x 1.2V AA NiMH or 1.5V Alkaline
AC Adapter....................................110 - 240VAC input, 9VDC 1.3A regulated output
Physical Dimensions
Inch / mm............................................6.3L x 3.56W x 1.68H / 160L x 90.5W x 43H