High-quality and fast digital source for modern Hi-FI / Hi-END digital-to-analog converters, via a USB interface!
http://digitall.in.ua
firmware ver 1.0.5 beta:
new kernel Kernel 4.4.*
The latest version of the library Library (alsa-lib) 1.1.0 / Plugins (alsa-plugins) 1.1.0
The latest version of the Music Player Music Player Daemon (MPD) 0.19.12 + Patchlintweaker DSD_Native support for new XMOS devices
Disable onboard audio device fully
completely eliminated the problem with the activation of Consume_mode mode after restart MPD service
added options in the playback settings with the modes dsd_Native_mode
Testing adding mmap parameter = yes / no sound output
DAC added the Info button to display information on reproduction and used DAC
http://digitall.in.ua
- Data transfer via USB 2.0 protocol at the digital DAC receiver in bit-perfect mode and formats: AAC, PCM, FLACK, DSD, MP3, OGG, WAVE modes:
- Sample rate 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 358.2kHz, 384kHz
- Sample depth of 16, 24, 32 bit, Native DSD (for new XMOS devices), DSD over PCM (DoP)
- Support for network protocols: NFS, SMB, and the presence of an internal hard drive SATA 2.5 "(HDD or SSD) Using a stable operating system based on Linux New Kernel 4.4 * complete with the latest drivers and tools to work -. ALSA (Advanced Linux Sound Architecture), Library (alsa-lib), Plugins (alsa-plugins), the latest stable version of the MPD and modified web-user interface of the control player - Volumio.
- The hardware consists of the motherboard based on ARM Cubieboard A10 / A20, high-quality power supply with linear stabilizer, which have a very low noise characteristics, and, combined with low consumption of system board, give a very positive effect, which is positive for the overall sound picture !
- The main and most important approach in the creation of this player - was to create a device that will be possible to play all modern digital audio formats, not concede a conventional PC, as well as to have a very low power consumption. Used Board CubieboardA10 / A20 has a consumption 5Watt average and works with 5 volts! With these advantages for it we make quality power supply with good components and stock into containers, with high-quality electrolytes and get rid of the PC disease.
firmware ver 1.0.5 beta:
new kernel Kernel 4.4.*
The latest version of the library Library (alsa-lib) 1.1.0 / Plugins (alsa-plugins) 1.1.0
The latest version of the Music Player Music Player Daemon (MPD) 0.19.12 + Patchlintweaker DSD_Native support for new XMOS devices
Disable onboard audio device fully
completely eliminated the problem with the activation of Consume_mode mode after restart MPD service
added options in the playback settings with the modes dsd_Native_mode
Testing adding mmap parameter = yes / no sound output
DAC added the Info button to display information on reproduction and used DAC
MY Custom DAC`s: