Type-C to 0.78mm 2 Pin Digital Headphone Cable LS-TC1 Is Officially Released!
Aug 11, 2023 at 3:06 AM Thread Starter Post #1 of 10

FiiO

Sponsor: FiiO
Joined
Jul 30, 2008
Posts
11,766
Likes
9,247
Location
Guangzhou,China
8048905.jpg



(1) Turn on your digital era
Pioneer tech is seen in digital development. The FiiO acoustic team specially crafted a digital audio headphone cable LS-TC1 for the “Little Conch” series of earphones, FD11 and FH11. Inside the Type-C connector of the LS-TC1 is a DSP audio decoding chip, allowing you to use your wired headphones with devices that only have a USB Type-C connector for painless and convenient access to high quality sound.
8048899.jpg



(2) Experience lossless sound, 24bit/96kHz PCM support
The DSP audio decoding chip in the LS-TC1 supports 24bit/96kHz PCM for truly breathtaking, lossless high-resolution audio.
8048900.jpg



(3) FiiO Quality, ever consistent
· The LS-TC1 connectors are gold-plated, for more stable signals and greater reliability
8048901.jpg



· The LS-TC1 features Litz braided wires, reducing eddy current loss and improving treble detail
8048902.jpg



· The LS-TC1 uses the “left blue right red” design, to make your listening more convenient
8048903.jpg



* The LS-TC1 is available on our AliExpress Official Store. Click the link below to take it home right away.
https://www.aliexpress.us/item/3256805739354532.html

Best regards,
Guangzhou FIIO Electronics Technology Co., Ltd.
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Aug 12, 2023 at 12:39 PM Post #3 of 10
8048905.jpg



(1) Turn on your digital era
Pioneer tech is seen in digital development. The FiiO acoustic team specially crafted a digital audio headphone cable LS-TC1 for the “Little Conch” series of earphones, FD11 and FH11. Inside the Type-C connector of the LS-TC1 is a DSP audio decoding chip, allowing you to use your wired headphones with devices that only have a USB Type-C connector for painless and convenient access to high quality sound.
8048899.jpg



(2) Experience lossless sound, 24bit/96kHz PCM support
The DSP audio decoding chip in the LS-TC1 supports 24bit/96kHz PCM for truly breathtaking, lossless high-resolution audio.
8048900.jpg



(3) FiiO Quality, ever consistent
· The LS-TC1 connectors are gold-plated, for more stable signals and greater reliability
8048901.jpg



· The LS-TC1 features Litz braided wires, reducing eddy current loss and improving treble detail
8048902.jpg



· The LS-TC1 uses the “left blue right red” design, to make your listening more convenient
8048903.jpg



* The LS-TC1 is available on our AliExpress Official Store. Click the link below to take it home right away.
https://www.aliexpress.us/item/3256805739354532.html

Best regards,
Guangzhou FIIO Electronics Technology Co., Ltd.
DSP…???
  • Does it mean LS-TC1 supports EQ and other DSP features (crossfeed, compressor, etc.)? If yes, does it work with Fiio Control?
  • Or… an EQ curve is pre-loaded at the factory, optimized for the FD11 & FH11, and it cannot be changed save, perhaps, through FW update?
  • Or…. the internal chip(s) supports DSP, but it is set “flat”, and it really behaves like a regular dongle integrated with the cable?
Is the USB-C optional cable bundled with the FH11, the same (same DSP settings) as LS-TC1?
 
Last edited:
Aug 14, 2023 at 4:14 AM Post #4 of 10
It looks like a good idea, more compact than a USB dongle. Are there measurements of how much power it sends? Some of the planar IEMs need more current than something like onboard sound or 3.5mm phone plugs.
Dear friend,

Sorry we do not have the output power data about it.

Best regards
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Aug 14, 2023 at 4:17 AM Post #5 of 10
DSP…???
  • Does it mean LS-TC1 supports EQ and other DSP features (crossfeed, compressor, etc.)? If yes, does it work with Fiio Control?
  • Or… an EQ curve is pre-loaded at the factory, optimized for the FD11 & FH11, and it cannot be changed save, perhaps, through FW update?
  • Or…. the internal chip(s) supports DSP, but it is set “flat”, and it really behaves like a regular dongle integrated with the cable?
Is the USB-C optional cable bundled with the FH11, the same (same DSP settings) as LS-TC1?
Dear friend,

The FiiO Control does not support LS-TC1.
And the USB-C optional cable bundled with the FH11 will come with FH11+LS-TC1.

Best regards
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Oct 6, 2023 at 2:24 AM Post #10 of 10
Looks good actually, but ideally you make a model with mic, just like this one.
Dear friend,

We will report to the product manger for assessing about that first.

Best regards
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com

Users who are viewing this thread

Back
Top