ryangs
New Head-Fier
- Joined
- Sep 26, 2005
- Posts
- 20
- Likes
- 0
I just finished building my first amp, a DIP16AMP X1. It kind of looks like a mess, because my soldering skills are less than perfect, but a thorough visual inspection shows that everything appears to be making contact, and nothing is jumping that shouldn't be.
When I turn the amp on, I hear nothing until I turn the volume pot all the way up. Then I hear a very quiet, scratchy version of the input.
Unfortunately, I don't have a meter with me here at school. I might be able to borrow one from somebody, or I might just go out and buy one, but before I do either, I thought I would post here to see if this is a common problem with a simple solution. Sooo... any ideas? Thanks in advance!
When I turn the amp on, I hear nothing until I turn the volume pot all the way up. Then I hear a very quiet, scratchy version of the input.
Unfortunately, I don't have a meter with me here at school. I might be able to borrow one from somebody, or I might just go out and buy one, but before I do either, I thought I would post here to see if this is a common problem with a simple solution. Sooo... any ideas? Thanks in advance!