[admaciaszek]

So I have pair of triple fi 10 that have 2 pin connectors and custom silver cable. These monitors are really heavy and are always coming off of the cable. I considering glueing them but then I can never replace the cable is there any less permanent solutions?

 

[jant71]

You can bend the pins. You can coat the pins with a thin coating of solder.

 

[Aevum]

or use 0.78mm pins, but be very careful, you might break the connector, and you might never be able to replace the cable again.

Also the TF10 had a manufacturing defect that if you pulled the cable too hard the socket would come out of the shell and you would find your earphone hanging by the 2 cables going to the crossover...