SONY NW-WM1Z / WM1A
Status
Not open for further replies.
May 29, 2020 at 1:47 AM Post #38,446 of 45,723
Hey again! So my Fidelio X2 and Pediodic Audio Be's have a 3.5mm cable but I was wondering, how would I go about listening to the WM1A through the balanced connection? What cables would you guys recommend for these headphones?
 
Last edited:
May 29, 2020 at 4:56 AM Post #38,448 of 45,723
Hi all

Some fairly noob questions here, but if anyone can help out it would be appreciated.

I got my WM1a second hand about 6 or so months ago (VGC), all good so far. It is a UK unit (going by the details in the side of the unit), but the Volume Cap has been lifted and High Gain feature has been enabled.

Q1. Is there any way for me to check which region the WM1A is on?

Q2. I have tried to flash / install some of the firmware mods (thanks @nc8000 for providing these), but I can't get any to install, as I get the following error message:

"Update will be terminated because the firmware data has collapsed
Redownload the program

Error Code: - 60002".

It would appear that my region is incompatible. My problem is that I have a Mac (which is on Catalina), but I also have a knackered old Mac (battery dead, trackpad broken), which is on an older operating system, which I used to install FW 3.02. However, this doesn't work either. Any suggestions?

As I only have access to a Mac presumably I can't reset the region on the WM1a?

Thanks

Have PM'd you :)
 
May 29, 2020 at 4:57 AM Post #38,449 of 45,723
[QUOTE = "proedros, publicación: 15495688, miembro: 158478"]
Probablemente terminaré usando WM1A - FW de nivel 2J el 90% de mi tiempo (teniendo un stock WM1A de Japón) pero qué demonios voy a descargar todos los FW, puedo terminar comprando un 1Z tal vez más tarde, ¿verdad?

este hilo está en llamas, gracias chicos (M&W)
[/CITAR]
He buscado enlaces de descarga de roms en toda la red y no pude encontrarlos, ¿podría alguien darme un nuevo enlace, por favor?
 
May 29, 2020 at 5:56 AM Post #38,450 of 45,723
[QUOTE = "proedros, publicación: 15495688, miembro: 158478"]
Probablemente terminaré usando WM1A - FW de nivel 2J el 90% de mi tiempo (teniendo un stock WM1A de Japón) pero qué demonios voy a descargar todos los FW, puedo terminar comprando un 1Z tal vez más tarde, ¿verdad?

este hilo está en llamas, gracias chicos (M&W)
[/CITAR]
He buscado enlaces de descarga de roms en toda la red y no pude encontrarlos, ¿podría alguien darme un nuevo enlace, por favor?
@nc8000 Tiene todos los firmware creados hasta la fecha, quizás l faltan los las nuevos de @morgenstern09 y @aceedburn
 
May 29, 2020 at 6:24 AM Post #38,452 of 45,723
As a follow up to my post yesterday, I must say WM1Z with v2 firmware from bro @morgenstern09 is musical bliss. Can’t stop listening to my entire collection again. Heavenly, majestic and warm. All elements of a perfect sounding device. But wait, I don’t have a 1Z, I have a 1A. So how is it possible?? Hallucination? Magic? 1A becomes 1Z.
 
Last edited:
May 29, 2020 at 6:55 AM Post #38,454 of 45,723
As a follow up to my post yesterday, I must say WM1Z with v2 firmware from bro @morgenstern09 is musical bliss. Can’t stop listening to my entire collection again. Heavenly, majestic and warm. All elements of a perfect sounding device. But wait, I don’t have a 1Z, I have a 1A. So how is it possible?? Hallucination? Magic? 1A becomes 1Z.
Grr! Sharing is caring :wink:
 
May 29, 2020 at 7:17 AM Post #38,455 of 45,723
Grr! Sharing is caring :wink:
Very true and it shall be shared. Very soon. Need to tidy up a few loose ends and oil the pumps etc. very soon.
 
May 29, 2020 at 7:18 AM Post #38,456 of 45,723
@nc8000 Tiene todos los firmware creados hasta la fecha, quizás l faltan los las nuevos de @morgenstern09 y @aceedburn
@Manuelle27 Creo que lo que el té está diciendo es que los expertos del firmware son las personas que el mencionó. Morgen y aceed burn te pueden ayudar, pero no se si ellos hablan español o tal vez necesiten usar un app de traducción como Google. Si necesitas clarificación de los explicaciones, puedo ayudar cuando mi tiempo permite. Buena suerte
 
May 29, 2020 at 7:22 AM Post #38,457 of 45,723
@Manuelle27 Creo que lo que el té está diciendo es que los expertos del firmware son las personas que el mencionó. Morgen y aceed burn te pueden ayudar, pero no se si ellos hablan español o tal vez necesiten usar un app de traducción como Google. Si necesitas clarificación de los explicaciones, puedo ayudar cuando mi tiempo permite. Buena suerte
Gracias bro. Saludos
 
May 29, 2020 at 7:36 AM Post #38,458 of 45,723
May 29, 2020 at 8:26 AM Post #38,459 of 45,723
Mi primer idioma es inglés. Mi español está más o menos. Pero allí voy cuando yo puedo
Mi primer idioma es el español, seguido el inglés y mi tercero el alemán (mexicano viviendo en alemania desde hace 2 años)
 
May 29, 2020 at 8:33 AM Post #38,460 of 45,723
Did someone changed the default language to espagniola?
Que passo amigos???
 
Status
Not open for further replies.

Users who are viewing this thread

Back
Top