[Isaansound]

I'm really liking my new setup, but being a "budget beater", it's not perfect. I've been getting some help from FLACvest (thanks!). These settings for the EQ seem to be pretty close. Anyone with reactions, suggestions, etc....?
 
bo +8db 40hz Q 1.0 (LS)
b1 -5db 250hz Q .6
b2 -4.5db 1500hz Q 1.0
b3 +3db 4000hz Q 1.0
b4 +10db 12500hz Q 1.5 (HS)
 
channel config-custom
stereo width -50%
crossfeed-yes
direct gain- -3db
cross gain -3db
hi att -7.5db
hi cutt 1800hz
dithering -yes
compressor  threshold-off, makeup gain -off
 
at this point I have the least confidence in the crossfeed settings
 
The initial objective was to pull up the soft highs and improve the soundstage, but after looking at the freq. chart, I got further into curve flattening.
 
 
 

 

[Isaansound]

OK sorry about the typo they are ATH-ES55's.
After playing around a lot, I recommend NOT using crossfeed. I get distortion out of it, despite trying a fair number of recommended settings. I am now running stereo width at 110%. Dithering ON

 

[oneballerpf]

Thanks. Now my klipsch x10's sound better with my fuze.