[kal_el_3914]

Building my first CMOY, and need some help with switch and 3.5 input. My switch (digikey part #360-1155-ND) has three lugs coming off it which ones do i use for basic on off opperation, and do i just put it into the poitive power line from the battery?

Next, my 3.5 input (digikey part # CP-3535-ND) has 5 lugs coming off the bottom. I Think the one closest to the opening is the ground, but which ones do i use for left and right channel?

If anyone with a few minutes to spare could hepl me out, it would be greatly appreciated.

Thanks

 

[d00dz]

All you need to do for that switch is connect the positive terminals from the battery into the middle one or any lug, and then the other into the one beside it. The only time it won't work is if you connect the wire to the two ends ones Since it's a DPST switch.
For the audio jack, lug #1 is ground (closest to the input), two is left and 4 is right, you don't need to connect 3 and 5.

Hope this helps

 

[kal_el_3914]

thank you so much. I'm now 15 minutes away from completing my first DIY project!!!