Postage sharing for mouser anyone in UK (Building a cmoy)?
Apr 5, 2013 at 3:03 PM Thread Starter Post #1 of 5

MaxD

100+ Head-Fier
Joined
May 7, 2012
Posts
331
Likes
256
[size=11.0pt] I live in Sussex in the UK and I am building myself a cmoyBB 2.03R.   I have ordered the board from JDS Labs.    Now I want to get all the bits including a few different OP Amps.[/size]
[size=11.0pt]  [/size]
[size=11.0pt] Mouser, DigiKey, Farnell and RS all charge a minimum of £12 for delivery of parts.   All I need will cost £20.   So does anyone else want to share the cost of shipping.  If we get to £50 order it will be free shipping from mouser.   [/size]
[size=11.0pt]  [/size]
[size=11.0pt] Anyone want to build a cmoy ?  Am I being tight?   Looks like Ill have to order bits from both Mouser and DigiKey so that’s £24 postage before I even get any parts.   I really didn't want to build the world's most expensive cmoy :)[/size]
[size=11.0pt]  [/size]
 
Apr 5, 2013 at 5:09 PM Post #2 of 5
Have you tried looking on ebay? A selection pack of 1% resistors is worth having...
 
http://www.ebay.co.uk/itm/1-4w-1-Metal-Film-Resistor-Kit-400pcs-20-Values-Assortment-Pack-Mix-Selection-/140903266497?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item20ce7d38c1
 
Plenty of opamps, caps to be found...
 
http://stores.ebay.com/Tayda2009/Amplifiers-Audio-Op-Amp-/_i.html?_fsub=1474002016&_sid=872591586&_trksid=p4634.c0.m322 
 
...not as quick as Farnell, but usually only a few days, even from Thailand. Never had any problems with them myself.
 
w
 
Apr 6, 2013 at 2:14 PM Post #3 of 5
[size=11.0pt] That’s a brilliant Idea.  Just been looking and see lots of stuff I could use for this project.   I normally avoid eBay for most stuff but these sort of things will probably be OK.[/size]
[size=11.0pt]  [/size]
[size=11.0pt] Thanks W[/size]
[size=11.0pt]  [/size]
[size=11.0pt] Have you ever got op amps from ebay ?   Any one you can recommend ?[/size]
 
Apr 6, 2013 at 3:07 PM Post #4 of 5
I bought many opamps in bulk from Tayda2009 (linked above), NE5532. Component snobs don't like the NE5532, but it's a very good opamp and only 20 cents US if you buy 50 like I do. They're also good for value electrolytics for power supplies, potentiometers, transistors*many. Free shipping.
 
This US seller:- http://stores.ebay.co.uk/OpAmps-and-MOSFETs is reliable, prices are often competitive with Farnell, Newark etc., I like LM4562 (good value, high performance audio), LME497xx series, e.g. 49720 (high performance audio), LME49990. I also bought LME49600 buffers from him, you don't need these yet...
 
I use Farnell and RS too, but they may charge shipping on smaller orders, although they don't seem to be charging me any more, but they have a minimum credit card order.
 
w
 
Apr 7, 2013 at 6:22 AM Post #5 of 5
Thanks for the advice.   I relay appreciate it.   
 
I think based on that I might as well build a few cmoy's   one based on the JDS labs board and a couple on veraboard.   I was thinking of doing some experimenting with poly-morph as a casing.    With a bit to enable recharge I could encase the whole thing and make it smaller and almost indestructible :).
 
OK going to get ordering now.   Thanks again for the help.
 

Users who are viewing this thread

Back
Top