[MoonAudio]

​

*NEW* Moon Audio Black Dragon V2 Shure Headphone Cable​

Starting at $315 USD​

Click Picture to order. ​

 ​

​

 ​

 Moon Audio Black Dragon V2 Headphone Cable for Shure SRH1440 & SRH1840 Full Size Headphones​

 ​

​

 Moon Audio Black Dragon V2 Headphone Cable for Shure SRH1440 & SRH1840 Full Size Headphones​

​

 Moon Audio Black Dragon V2 Headphone Cable for Shure SRH1440 & SRH1840 Full Size Headphones​

 

​

 Moon Audio Black Dragon V2 Headphone Cable for Shure SRH1440 & SRH1840 Full Size Headphones​

​

 Moon Audio Black Dragon V2 Headphone Cable for Shure SRH1440 & SRH1840 Full Size Headphones​

​

 Moon Audio Black Dragon V2 Headphone Cable for Shure SRH1440 & SRH1840 Full Size Headphones​

 
 
 

 ​

*NEW* Black Dragon V2 Shure Headphone Cable for the Shure SRH1440 & Shure SRH1840 Full Size Headphones.
 
This is one of Moon Audio's many Custom High End Upgrade Headphone Cable for Full Size Headphones.
 
Moon Audio had to create our own molds or connection system in order to plug right in to the Shure Full Size Headphones.
 
This creates a tighter connection and thus improves the sound, clarity, dynamics and improvement to the headphones.
 
Moon Audio is the only company (we know of in the world) that can directly connect to the Shure 1440 and Shure 1840 right now. This is another example of us working hard to bring the audiophiles custom audio cables at superior pricing, quality and customized connection capablities.
 
*Available in ONLY 10 Foot Lengths for now* - 5' and 15' Lengths ready mid September 2013
 
-LIMITED STOCK-
 
First come, First Serve - Order NOW!
 
The Black Dragon Headphone Version 2 headphone replacement cable is Moon Audio's Premiere hard wiring cable. The original Black Dragon V2 headphone cable can be hard-wired to just about any headphone such as Grado, AKG, Audio-Technica, etc.
 
The Black Dragon V2 cable uses 4 x 21.5AWG Teflon insulated stranded conductors using pure single crystallized UP-OCC pure copper with 7N purity 99.99998%.
 
Description
 
Each conductor is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.
The conductors are then surrounded by cotton and then a layer of Teflon tape.
 
The new version is now also shielded and placed in a polyethylene jacket for further protection.
 
For the Sennheiser version the pin connectors are soldered directly to the conductors of the cable. The splicing method used by other cable companies using a stock Sennheiser cable's connectors is a poor method. And defeats the purpose of replacing the cable. That method requires you to once more send the signal through the poor quality conductors in the stock Sennheiser cable as well as through one more solder joint. Moon Audio, Cardas and Zu are the only three cable companies I am aware of that use a preferred method of headphone connection method
 
The wire is soldered to the connector with Cardas silver solder. The default 1/4" Plug is the Furutech FP-704(G). The default 1/8" plug is a Neutrik NYS231B. And the default XLR is the Black Neutrik NC3. The wire is then covered in 2 layers of Techflex braid.
 
The cable is extremely smooth sounding with great low end and wonderful voicing. And will remove the veil all Sennheiser headphones just like the Silver Dragon. Most stock headphone cables are made of poor ultra thin conductors that work as a bottle neck for the sound.
 
If you listen to any type of music then this is the cable will suit your needs. It is a little more rounded than the Blue Dragon. Fuller Sound and more bottom end weight..

 

Drew Baird, P.E. 
Moon Audio 
140 Iowa Lane
Suite 204
Cary, NC 27511 
919-649-5018 
http://www.moon-audio.com

Follow us Today!

​