[Ubetit]

I have quite a bit of experience building cables from my radio days, so I ordered up some parts and here's the result. I'm also working a few variations using Belden, Canare, and Kimber cables with Nuetrik, Cardas and Canare connectors. Now I remember why I used to like building patch cords and mic cables.

I can't get it to post here so here's the link

ftp://ftp.hutchisonmedia.com/temp/good1.jpg


Switchcraft plugs, Homegrown silver braid, Techflex, 3-1 3M shrink tubing.

 

[Jeff]

Nice!

 

[x1lexure]

How would one go about putting cloth and plastic around an IC like that. I just recieved one from JMT and am very interested.

 

[x1lexure]

The cable looks like this. (You've probably already seen this but thought it would help just incase he did his diffrent then yours.)

 

[Ubetit]

It's a little challenging getting the Techflex to look right. I had to use a pair of helper hands to hold the techflex jacket back from the terminals while I soldered the wires. The 1/8 inch techflex works better than the 1/4 inch stuff for the Homegrown wire. The 1/4 inch looks better on the Canare and Belden cable. Since this picture was taken I put the smaller jacket on the shorter wire and it looks much better. Sounds great too. I hope the solid core silver wire can take some abuse because it's not that flexible