[jrosenth]

I have a corda move (maybe a move 2 or 3) and am purchasing a power supply for it (from Radio Shack)

There are two of them both regulated at 12V.

One at 1.5 amps and another at 2.5 amps

Could I used one with 2.5 amps and would it potentially sound better?

thanks you very much

 

[wuwhere]

Quote:

Originally Posted by jrosenth /img/forum/go_quote.gif I have a corda move (maybe a move 2 or 3) and am purchasing a power supply for it (from Radio Shack) There are two of them both regulated at 12V. One at 1.5 amps and another at 2.5 amps Could I used one with 2.5 amps and would it potentially sound better? thanks you very much

The amp would only take enough current that it needs. What is the amp spec of your Move? You should at least buy that current rating.

 

[jrosenth]

Here's the spec on the move 3 from this page:

Mean current uptake: 18 mA / 7mA
(high/low-current-consumption-mode)

I'm guessing the smaller of the two power supplies will be fine since they are both 12v regulated and it is a bit cheaper but was just wondering if it made a difference or if any had any experiences.

 

[wuwhere]

You're good with the 1.5A then.

 

[myinitialsaredac]

Yea, even the 1.5A is putting out over 1000x the mean current uptake oO. You should be covered nicely =D.

Dave

 

[jrosenth]

Great - thanks - appreciate it guys