Deleeh
Headphoneus Supremus
Hello,
My Little Dot 1+ broke last week.
I was able to find the fault and it seems to be the capacitor.
I will replace it and make a few improvements that are not pretty from a manufacturing point of view, but nothing more.
My first question is the film capacitor from Mex.
This one
https://www.conrad.de/de/p/tru-comp...f-275-v-ac-10-15-mm-l-x-b-x-h-18-1564957.html
Can I also install this one from Wima?
https://www.conrad.de/de/p/wima-mkx...2-f-275-v-ac-10-15-mm-l-x-b-x-h-1-451671.html
It should be the same in terms of the values.
The second question is when the whole conversion is finished.
Do I have to readjust the bias control by changing the condenser and film capacitor or can I leave it as it is?
Would be very nice if someone could help.
My Little Dot 1+ broke last week.
I was able to find the fault and it seems to be the capacitor.
I will replace it and make a few improvements that are not pretty from a manufacturing point of view, but nothing more.
My first question is the film capacitor from Mex.
This one
https://www.conrad.de/de/p/tru-comp...f-275-v-ac-10-15-mm-l-x-b-x-h-18-1564957.html
Can I also install this one from Wima?
https://www.conrad.de/de/p/wima-mkx...2-f-275-v-ac-10-15-mm-l-x-b-x-h-1-451671.html
It should be the same in terms of the values.
The second question is when the whole conversion is finished.
Do I have to readjust the bias control by changing the condenser and film capacitor or can I leave it as it is?
Would be very nice if someone could help.