redrol
Headphoneus Supremus
if they are cutting out, the 2 pin prolly broke from the wires partially, It's fixable.
How would I go about fixing it?if they are cutting out, the 2 pin prolly broke from the wires partially, It's fixable.
Correct me if I am worng but Pro has the exact same frequency response as the set has not changed but added a modular cable?The S12 Pro got reviewed.
FR looks damn good.
https://ianfann.squig.link/?share=Harman_2019_Target,LETSHUOER_S12_PRO
They (barely) mentioned it has updated tuning on their site. Ian has only measurements for the S12 Pro. But comparing to HBB and Supers measurements of the S & Z 12s it does look different. Mainly the sub bass is elevated over a tamed upper mid.Correct me if I am worng but Pro has the exact same frequency response as the set has not changed but added a modular cable?
I must emphasize too, the wide bore is a must have. Now i use bgvp w01 and kz twisted core, it miraculously open up the transparency, separation and air. They cost 2 dollars. The down side is they are unusualy short, 8.1mm, which seems to effect the sound stage.Using the long wide bore tips that came with the Truthears Zero on my Shortbus modded S12 = bliss
A quick note to hiby fc4 pairing 340mw 4.4bal. it is great, it passes my bass test about quality and delicate quantity. however I still think 340mw is too much for a iem. Its even more than portable desktop amp. 5% volume give too loud.
Does anyone use s12 with desktop amp with similar 340 milliwatts?
A quick note to hiby fc4 pairing 340mw 4.4bal. it is great, it passes my bass test about quality and delicate quantity. however I still think 340mw is too much for a iem. Its even more than portable desktop amp. 5% volume give too loud.
Does anyone use s12 with desktop amp with similar 340 milliwatts?
HBB showed substantial differences on the Z12 and S12, which turned out to not be the case at all (see VSG's measurements that match Shuoer's).They (barely) mentioned it has updated tuning on their site. Ian has only measurements for the S12 Pro. But comparing to HBB and Supers measurements of the S & Z 12s it does look different. Mainly the sub bass is elevated over a tamed upper mid.
Not worth buying for me have the Z12 and S12 (found it in my lunch bag!!) on Qudelixs but worth the premium for first time S12 buyers imo.
yeah the stem on the Truthears Zero is a lot longer than most, so the tips that come with it are similarly long. They make up for the sort of short nozzle of the S12I must emphasize too, the wide bore is a must have. Now i use bgvp w01 and kz twisted core, it miraculously open up the transparency, separation and air. They cost 2 dollars. The down side is they are unusualy short, 8.1mm, which seems to effect the sound stage.
I'm looking forward to get a tall wide bore at any price. I'm not sure zendra or cpxxx variant is as tall and wide.
The Aet07 is a little narrower but it's taller. Still much worse than bgvp w01.
This guy recommends CTM double-flange tips:
Tips: https://cleartunemonitors.com/products/flexi-tips
But everyone here seems to recommend single flange.
Thoughts?
yeah the stem on the Truthears Zero is a lot longer than most, so the tips that come with it are similarly long. They make up for the sort of short nozzle of the S12