LDAC bluetooth receiver

Feb 13, 2020 at 9:36 AM Post #16 of 28
is this confirmed working sir? the usb out will still function while it acts as bluetooth receiver? i asked around and many similar daps like the fiio m5 can only do one function at the same time. If its possible then this could be the cheaper option for on the go using the mojo and my iphone/walkman as they can stream via bluetooth and send the signal to the mojo

From what i read from review it does ldac to usb out, but not sure if M0 dac will be in path or not
 
Feb 13, 2020 at 10:09 AM Post #18 of 28
1581597686908.png

On Bluetooth receiver mode, TempoTec V1 act as bluetooth DAC, which is deal breaker for me.

I want, just an transport which receive Bluetooth in and does an USB out in bit-perfect mode, without altering signal path. Not sure if such a device exists, also not sure if Shanling M0 can do that as well.
I think the Bluetooth DAC part is par for the course. I suppose anything that receives LDAC in then unfolds it can be called a Bluetooth DAC. So, it’s description might be confusing, but it’s use purpose is what you are looking for. Whether that unfolded LDAC information then proceeds through usb to your mojo unfettered? I’m not sure. I can tell you that it all works pretty seamlessly, as well have tried it with other portable DAC/amps. I’ll have another listen and see if I perceive any deficiencies...
 
Feb 13, 2020 at 10:49 AM Post #20 of 28
I think the Bluetooth DAC part is par for the course. I suppose anything that receives LDAC in then unfolds it can be called a Bluetooth DAC. So, it’s description might be confusing, but it’s use purpose is what you are looking for. Whether that unfolded LDAC information then proceeds through usb to your mojo unfettered? I’m not sure. I can tell you that it all works pretty seamlessly, as well have tried it with other portable DAC/amps. I’ll have another listen and see if I perceive any deficiencies...

Great, thanks for let me know. Will order and check it out, not sure how much time it would take, from China.
 
Feb 13, 2020 at 1:58 PM Post #22 of 28
Great, thanks for let me know. Will order and check it out, not sure how much time it would take, from China.
If you do order the Tempotec V1 (not V1A), I do have a question for you that you might be able to answer... With the Mojo, is there a sound difference between your USB in and your Coaxial in? The V1 has 2 Micro SD slots, so you can use it as a storage transport or with Bluetooth (like you wanted). I was just curious about the Mojo and it's two digital input choices. I have read some assessments where some preferred the Coaxial in opposed to the usb in on the Mojo. Luckily the V1 has both (the V1A does not). So, I'm curious. I actually bought the V1 specifically because it had a Coaxial out. I have a little amp that has usb in and coaxial in (PS Audio Sprout) but it sucks power when I use the usb connected to any portable device (making it useless). With the coaxial connection, it doesn't suck power from the transport and I can charge it (via usb C) if I need to. That was my impetus for getting it. It's worked out well.
 
Feb 13, 2020 at 2:16 PM Post #23 of 28
If you do order the Tempotec V1 (not V1A), I do have a question for you that you might be able to answer... With the Mojo, is there a sound difference between your USB in and your Coaxial in? The V1 has 2 Micro SD slots, so you can use it as a storage transport or with Bluetooth (like you wanted). I was just curious about the Mojo and it's two digital input choices. I have read some assessments where some preferred the Coaxial in opposed to the usb in on the Mojo. Luckily the V1 has both (the V1A does not). So, I'm curious. I actually bought the V1 specifically because it had a Coaxial out. I have a little amp that has usb in and coaxial in (PS Audio Sprout) but it sucks power when I use the usb connected to any portable device (making it useless). With the coaxial connection, it doesn't suck power from the transport and I can charge it (via usb C) if I need to. That was my impetus for getting it. It's worked out well.
Mojo sounds best via digital USB in
 
Feb 13, 2020 at 11:46 PM Post #28 of 28
If you do order the Tempotec V1 (not V1A), I do have a question for you that you might be able to answer... With the Mojo, is there a sound difference between your USB in and your Coaxial in? The V1 has 2 Micro SD slots, so you can use it as a storage transport or with Bluetooth (like you wanted). I was just curious about the Mojo and it's two digital input choices. I have read some assessments where some preferred the Coaxial in opposed to the usb in on the Mojo. Luckily the V1 has both (the V1A does not). So, I'm curious. I actually bought the V1 specifically because it had a Coaxial out. I have a little amp that has usb in and coaxial in (PS Audio Sprout) but it sucks power when I use the usb connected to any portable device (making it useless). With the coaxial connection, it doesn't suck power from the transport and I can charge it (via usb C) if I need to. That was my impetus for getting it. It's worked out well.

I have ordered V1 not V1A, do not need analog section. Currently using SPDIF via AK100II DAP with Mojo, It sounds clean and no jitter but this DAP cannot stream music. Other option I have is V40 phone usb out to Mojo, but sounds very muddy with Android mixer in its path.

once I have V1 will update back, ordered on Aliexpress not sure when I would be getting it.
 

Users who are viewing this thread

Back
Top