- Joined
- Mar 29, 2003
- Posts
- 1,386
- Likes
- 90
Welcome to the US the iQube Portable Headphone amp. To date, this is the best portable headphone amp we have heard. We don't usually make a claim like that, but in this case to my ears there is no better.
Moon Audio is now the official North American distributor and reseller of this fine product. So Dealer inquiries are welcome. And until the end of April we will be offering a special deal. The Retail price has been set for $500. The sale price will be $450 with a free iPod Strap until the end of April. This sale is likely never to happen again, due to the weak dollar conversion. So I would jump on it. We will accept Check and MO or Paypal +3%. Once the sale is over there will be no Paypal fee. We cant offer this special price and cover the Paypal fees. Hope you understand. USB Charger Cable is $25.
Please reply to Post in the MallFi Forum to reserve yours.
The first shipment arrived this week and is already starting to go quickly. Next batch will be in sometime next month. Get on the list fast.
Review links can be found on our website. And a 6moons review is due up soon.
i-Qube Details
Lightweight, portable Headphone amplifier
High efficiency (90-95%) Class D amplifier
Runs on 4x AAA alkaline or rechargeable batteries, user replaceable
8-fold output buffer for a (near to) load independent output behavior
4th order feedback loop for minimum distortion
Fixed, phase-shifted carrier wave oscillator decreases inter-channel distortion
Ultra low noise front end accepts any line level source without the need for impedance matching
Top A-grade components used:
Medical graded double layer epoxy using HOFC (High Oxygen Free Copper)
Optimized board design enhances signal quality
Alps potentiometer
Vishay series 036 decoupling capacitors throughout
Panasonic stack film capacitors
Carbon signal resistors
Lumberg I/O connectors
Fully RoHS compliant
Retro art design, CNC machined aluminum casing
Rubber touch feel painted covers
Technical Specifications
Input impedance:
10k ohm
Voltage gain:
low gain: 2
high gain 7
Frequency response @ 200 mV into a 16 Ohm load:
5 - 50 kHz. (-1 dB)
Maximum output power per channel from 20-20,000Hz:
160 mW_16 ohm
80 mW_32 ohm
12 mW_200 ohm
Output impedance:
<0,1 ohm @ f<5kHz
< 1,5 ohm @ 20kHz
THD at 200mV output (typ) 0.01%:
(max) 0.03%.
Output noise:
10uV (unweighted)
Charge input:
any DC voltage between 5V and 20V, polarity protected
battery charge current: 0,3A
typical charger current consumption @ 5Vdc input: 0,4A
typical charger current consumption @ 20Vdc input: 0,1A
Dimensions:
Height: 23 mm
Width: 63 mm
Length: 107mm (incl. volume knob)
Moon Audio is now the official North American distributor and reseller of this fine product. So Dealer inquiries are welcome. And until the end of April we will be offering a special deal. The Retail price has been set for $500. The sale price will be $450 with a free iPod Strap until the end of April. This sale is likely never to happen again, due to the weak dollar conversion. So I would jump on it. We will accept Check and MO or Paypal +3%. Once the sale is over there will be no Paypal fee. We cant offer this special price and cover the Paypal fees. Hope you understand. USB Charger Cable is $25.
Please reply to Post in the MallFi Forum to reserve yours.
The first shipment arrived this week and is already starting to go quickly. Next batch will be in sometime next month. Get on the list fast.
Review links can be found on our website. And a 6moons review is due up soon.
i-Qube Details
Lightweight, portable Headphone amplifier
High efficiency (90-95%) Class D amplifier
Runs on 4x AAA alkaline or rechargeable batteries, user replaceable
8-fold output buffer for a (near to) load independent output behavior
4th order feedback loop for minimum distortion
Fixed, phase-shifted carrier wave oscillator decreases inter-channel distortion
Ultra low noise front end accepts any line level source without the need for impedance matching
Top A-grade components used:
Medical graded double layer epoxy using HOFC (High Oxygen Free Copper)
Optimized board design enhances signal quality
Alps potentiometer
Vishay series 036 decoupling capacitors throughout
Panasonic stack film capacitors
Carbon signal resistors
Lumberg I/O connectors
Fully RoHS compliant
Retro art design, CNC machined aluminum casing
Rubber touch feel painted covers
Technical Specifications
Input impedance:
10k ohm
Voltage gain:
low gain: 2
high gain 7
Frequency response @ 200 mV into a 16 Ohm load:
5 - 50 kHz. (-1 dB)
Maximum output power per channel from 20-20,000Hz:
160 mW_16 ohm
80 mW_32 ohm
12 mW_200 ohm
Output impedance:
<0,1 ohm @ f<5kHz
< 1,5 ohm @ 20kHz
THD at 200mV output (typ) 0.01%:
(max) 0.03%.
Output noise:
10uV (unweighted)
Charge input:
any DC voltage between 5V and 20V, polarity protected
battery charge current: 0,3A
typical charger current consumption @ 5Vdc input: 0,4A
typical charger current consumption @ 20Vdc input: 0,1A
Dimensions:
Height: 23 mm
Width: 63 mm
Length: 107mm (incl. volume knob)
