iFi Micro iDAC2 impression (and comparison to the old iDAC)
Jul 30, 2015 at 1:41 AM Thread Starter Post #1 of 2

windwolf447

100+ Head-Fier
Joined
Aug 5, 2014
Posts
170
Likes
64
Hey guys I just did a short review on the iFi micro iDac2, here is the review video! 
 

 
the spec of this device:
 
Specifications: 
Input:USB3.0 (USB2.0 compatible)
Output:SPDIF RCA (only PCM up to 192KHz)
 Audio RCA
 3.5mm Headphone
Formats:44.1/48/88.2/96/176.4/192/384KHz PCM
 2.8/3.1/5.6/6.2/11.2/12.4MHz DSD
 353/384KHz DXD
DAC:Bit-Perfect DSD & DXD DAC by Burr Brown (1-DAC Chip; 2-Channel; 4-Signals)
Filters: 
-PCM:Bit-Perfect/Minimum Phase/Standard, Digital filters selectable
-DSD:Extreme/Extended/Standard, Analogue filters selectable
-DXD:Bit-Perfect Processing, Fixed Analogue filter
Line Section: 
Output:2.1V (+/-0.05V) fixed
Zout:< 39 Ohm
SNR:> 114dB(A) @ 0dBFS
THD+N:< 0.0025% @ 0dBFS (100k Load)
 < 0.025% @ 0dBFS (600R Load)
Headphone Section: 
Output:> 350mW (2.40V) into 16R (<10% THD+N)
 > 34mW (3.20V) into 300R (< 0.1% THD+N)
Zout:< 2 Ohm
THD+N:< 0.0025% (1V into 16 Ohm, 0dBFS)
SNR:> 114dBA (3.2V into 16 Ohm, 0dBFS)
  
Power consumption:<1.5W
Dimensions:158(l)x68(w)x28(h)mm
Weight:265g(0.58 lbs)
 

Users who are viewing this thread

Back
Top