[DevilofLife]

I can't imagine what may affect WiFi in my add-on. My DX150 still connects to 5GHz just fine. I'd suggest to install WiFi Analyzer from Play Store to see networks and channels available.

Install WiFi Analyer it does show my 5GHz network with good signal strength I just stuck on authenticating or obtaining IP address.

Works fine on 2.4GHz network on 8.1

So I went back to 6.0 Lurker everything back to normal 2.4GHz and 5GHz networks is working.

 

[NiVrA]

Install WiFi Analyer it does show my 5GHz network with good signal strength I just stuck on authenticating or obtaining IP address.

Works fine on 2.4GHz network on 8.1

So I went back to 6.0 Lurker everything back to normal 2.4GHz and 5GHz networks is working.

is the 6.0 have a sluggish ui?or the 8.1 is better?

 

[karloil]

is the 6.0 have a sluggish ui?or the 8.1 is better?

Oreo is a lot snappier!

 

[NiVrA]

Oreo is a lot snappier!

thanks!do you know how to calibrate its battery?

 

[ldo77]

Install WiFi Analyer it does show my 5GHz network with good signal strength I just stuck on authenticating or obtaining IP address.

Works fine on 2.4GHz network on 8.1

So I went back to 6.0 Lurker everything back to normal 2.4GHz and 5GHz networks is working.

How did you go back to 6.0 Lurker ?

 

[NiVrA]

How did you go back to 6.0 Lurker ?

You can use this https://github.com/Lurker00/DX150-firmware/releases to return to 6.1..just did it now since it was more smoother than 8.1..Thanks to Lurker for this!

 

[bose301s]

You can use this https://github.com/Lurker00/DX150-firmware/releases to return to 6.1..just did it now since it was more smoother than 8.1..Thanks to Lurker for this!

There is no way 6.1 was smoother than 8.1, it's literally impossible.

 

[bose301s]

thanks!do you know how to calibrate its battery?

Android hasn't needed battery calibration for years, since like version 4.

 

[NiVrA]

Android hasn't needed battery calibration for years, since like version 4.

I dont know though cause when my battery level was 99% then when i plugged it in my pc it became 90% wew XD

 

[ldo77]

You can use this https://github.com/Lurker00/DX150-firmware/releases to return to 6.1..just did it now since it was more smoother than 8.1..Thanks to Lurker for this!

Thanks
My dx150 is Back to Android 6.0.1 and under pure Mango

 

[Styxx10]

Thanks
My dx150 is Back to Android 6.0.1 and under pure Mango

I was considering upgrading my DX150 to 8.1 , but see a few reverting back which makes me kinda nervous. Anyone here who can say that it’s been a good experience ? , seems to a few that don’t feel it’s that good... appreciate any views....

 

[karloil]

thanks!do you know how to calibrate its battery?

my way of calibrating the battery is very old school - i simply drain the battery flat then charge it back again.

You can use this https://github.com/Lurker00/DX150-firmware/releases to return to 6.1..just did it now since it was more smoother than 8.1..Thanks to Lurker for this!

What do you mean by smoother? Because i'm loving Oreo (with or without Lurker's add-on).

 

[NiVrA]

my way of calibrating the battery is very old school - i simply drain the battery flat then charge it back again.



What do you mean by smoother? Because i'm loving Oreo (with or without Lurker's add-on).

i mean the 8.1 update make my devices verry sluggish though and also i dont know if there is a problem in my device but the wifi connection isnt stable at all

 

[karloil]

i mean the 8.1 update make my devices verry sluggish though and also i dont know if there is a problem in my device but the wifi connection isnt stable at all

have you tried doing a hard reset after upgrading to Oreo?

 

[NiVrA]

have you tried doing a hard reset after upgrading to Oreo?

How to do a hard reset? if you mean by going to settings a factory reset ive done it already...but i know that isnt hard reset..if you do you how to do it please guide me...thanks!