Ibasso dx 200 serious problem
May 26, 2023 at 12:28 PM Thread Starter Post #1 of 11

txmaiden

New Head-Fier
Joined
Apr 30, 2017
Posts
9
Likes
0
My dx 200 was working perfectly, remove the sd card ..... charge the battery to 100% and turn it off. Then his death occurred. It does not turn on in any way, and it does not load either, nothing appears on the screen.
I have tried various things. 1- change the battery and nothing, still the same.
2- I leave it charging for several days, it remains the same.
3- I try to flash, the pc doesn't recognize anything and I can't do it.
I don't know what I can do anymore, any suggestions, thanks.
 
May 26, 2023 at 2:06 PM Post #2 of 11
Try soft resetting Android you can find device specific instructions by searching the DX200 thread. If all else fails reach out to @Paul - iBasso .He should be able to assist or point you in the right direction for a resolution.
 
Last edited:
May 26, 2023 at 3:20 PM Post #4 of 11
The procedures vary per the manufacturer of the Android device but it would be some variation of holding the power button and pressing the volume button(s).
 
May 27, 2023 at 11:42 AM Post #10 of 11
I would hazard a guess that if you’re not getting any indicator of “charging” when plugged into a charging source it isn’t the power button, as you should get some screen activity even when turned off.

Consider letting ibasso fix it for you.
 

Users who are viewing this thread

Back
Top