[ujiko]

I forgot to say what IEM I want to use the cable with. Westone 3X

 

[drubrew]

Correct. 3.5mm.
 
Quote:

I would like to pre-order the cable in 64' with the Oyaide right angle 1/8 mini. Is that the same as a 3.5 mini?
 
Thanks

 

[dagothur]

Standard vs. Metric - 1/4 inch=6.3 mm, 1/8 inch=3.5 mm
 
Quote:

Correct. 3.5mm.
 
Quote:

I would like to pre-order the cable in 64' with the Oyaide right angle 1/8 mini. Is that the same as a 3.5 mini?
 
Thanks

 

 

[Mark S]

I own this cable and think it is great. A solid upgrade over the stock cable that came with my UE monitors. The only VERY slight negative is that the cable is a little stiff, but it is not a big deal.

 

[jermng]

Quote:

I own this cable and think it is great. A solid upgrade over the stock cable that came with my UE monitors. The only VERY slight negative is that the cable is a little stiff, but it is not a big deal.

But it's not even shipping yet ... you got a trial?

 

[ianmedium]

Would you please answer my question as to the cable fitting the triple.fi10?

 

[Asr]

Hey Drew, roughly when do you expect this cable to be available? I recently ran into an issue with my JH13 cable and will probably have to replace it completely, so I might be interested in a Silver Dragon for it.

 

[shuro]

I'd like to order a 64" with RSA Protector term
Thanks

 

[ishtob]

edit: actually due to financial circumstances, i won't be able to purchase these cables for a few months ... they will still be around right?

 

[drubrew]

We had a small batch that we did as a test run before we went with the full order of moldings. Thus a few lucky people got there cables early.

 
Quote:

But it's not even shipping yet ... you got a trial?

 

[drubrew]

The molders just sent me a bill which means production should start soon. I wish I could hammer the date better than that. But it is out of my control.

 
Quote:

Hey Drew, roughly when do you expect this cable to be available? I recently ran into an issue with my JH13 cable and will probably have to replace it completely, so I might be interested in a Silver Dragon for it.

 

[drubrew]

I am pretty sure I mentioned this in another post. But let me go into this further. I think the pin system is the same, but the shape of the mold is different. We hope down the road to create a mold to mirror the stock one but at this point we do not have one yet. Can some one with a pair of Triple.Fi and a Custom UE see if the Custom UE stock cable pin config fits into the Triple.Fi. If it does there is no reason why you cant use the current connector on the Silver Dragon IEM cable.
I will order a pair of Triple.Fi to look into this further.
 
Quote:

Would you please answer my question as to the cable fitting the triple.fi10?

 

[ianmedium]

Quote:

I am pretty sure I mentioned this in another post. But let me go into this further. I think the pin system is the same, but the shape of the mold is different. We hope down the road to create a mold to mirror the stock one but at this point we do not have one yet. Can some one with a pair of Triple.Fi and a Custom UE see if the Custom UE stock cable pin config fits into the Triple.Fi. If it does there is no reason why you cant use the current connector on the Silver Dragon IEM cable.
I will order a pair of Triple.Fi to look into this further.
 
Quote:

Would you please answer my question as to the cable fitting the triple.fi10?

 

Thanks so much for that. There was a similar question but there was no answer in the content box.

 

[kimms]

Hi I like to get 48inch with Oyaide Rhodium Plated straight or right angled 1/8" mini plug. And I would like to make sure whether it is campatable with UE triplefi 10.
 

 

[jckp919]

I would like to order a 64" Oyaide Rhodium Plated straight mini plug..(3.5mm) for JH 13 pro
 
Thanks!! Hope the cable will be ready soon coz my stock cable has already oxidized..