Whoops. My bad, turned on and it worked fine. still connects to Bluetooth devices which is kind of cool. Cheers!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Get Your FiiO BTR3 Upgraded to the Latest Firmware--v0912
- Home
- Forums
- Head-Fi Special Forums
- Premier Sponsor Forums and Sponsor Forums
- Premier Sponsor Forums
- FiiO
- Thread starter FiiO
- Start date
zebylong
New Head-Fier
- Joined
- Apr 24, 2013
- Posts
- 3
- Likes
- 0
Anyone having trouble updating? With my device in DFU mode, DfuWizard gets to the point where it starts the upgrade process, then immediately fails with, "The upgrade operation was stopped while attempting to prepare the BlueCore module for the firmware upgrade".
Device seems to work well otherwise. Perhaps I already have the latest firmware? (Purchased Oct 16)
Device seems to work well otherwise. Perhaps I already have the latest firmware? (Purchased Oct 16)
Dear friend,Anyone having trouble updating? With my device in DFU mode, DfuWizard gets to the point where it starts the upgrade process, then immediately fails with, "The upgrade operation was stopped while attempting to prepare the BlueCore module for the firmware upgrade".
Device seems to work well otherwise. Perhaps I already have the latest firmware? (Purchased Oct 16)
If you bought the BTR3 from Oct 16, it is in latest firmware version. You don't need to update the firmware again.
Best regards
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
BenKatz
100+ Head-Fier
When I open the Fiio App to check the BTR3, it says that the functions are only available with the latest firmware version. However, when I go through the update stps, when i get to the "browse" part, there's no ".DFU" file anywhere to be found on my computer (which should be the firmware update file). Therefore I can't update to the latest version. Basically the update software doesn't download the DFU file to my computer. Help?
Dear friend,When I open the Fiio App to check the BTR3, it says that the functions are only available with the latest firmware version. However, when I go through the update stps, when i get to the "browse" part, there's no ".DFU" file anywhere to be found on my computer (which should be the firmware update file). Therefore I can't update to the latest version. Basically the update software doesn't download the DFU file to my computer. Help?
You should get more information from this thread instead: https://www.head-fi.org/threads/fiio-releases-the-new-firmware-v1-0-for-btr3.892468/
Best regards
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
Hello, I am reaching out to see if someone at Fiio can help. I contacted Fiio about a problem with my BTR3. I received replies and exchanged messages three times with the support team. The last reply was November 16th when they asked for more information so that I could send in my BTR3 to them for testing and repair. I sent the invoice receipt information they asked for, but no reply. After my contact attempt on November 16, I have contacted them again on November 21 and then again on November 27 asking for follow-up but I haven't received any reply. The last communication from Fiio support remains from back on November 16th. Can someone from Fiio contact me to assist further?
The only case ID# I see is from the email subject: ud:01490016
Thank you very much.
Min
The only case ID# I see is from the email subject: ud:01490016
Thank you very much.
Min
Dear friend,Hello, I am reaching out to see if someone at Fiio can help. I contacted Fiio about a problem with my BTR3. I received replies and exchanged messages three times with the support team. The last reply was November 16th when they asked for more information so that I could send in my BTR3 to them for testing and repair. I sent the invoice receipt information they asked for, but no reply. After my contact attempt on November 16, I have contacted them again on November 21 and then again on November 27 asking for follow-up but I haven't received any reply. The last communication from Fiio support remains from back on November 16th. Can someone from Fiio contact me to assist further?
The only case ID# I see is from the email subject: ud:01490016
Thank you very much.
Min
Sorry for the delay. We checked and found that your email was marked mistakenly as spam, and we missed it when it came.
We will reply you as soon as possible. Sorry for bringing inconvenience to you.
Best regards
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
Thank you for your reply with further instructions. I look forward to having a working BTR3 again soon. I really like the product and I miss using it.Dear friend,
Sorry for the delay. We checked and found that your email was marked mistakenly as spam, and we missed it when it came.
We will reply you as soon as possible. Sorry for bringing inconvenience to you.
Best regards
just received mine I wanted to check the firmware only to discover no MAC version available
shocking since MAC community is huge now....
shocking since MAC community is huge now....
Dear friend,just received mine I wanted to check the firmware only to discover no MAC version available
shocking since MAC community is huge now....
You could check the firmware version of your BTR3 in your mobile phone via the FiiO Music APP.
Best regards
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
dannyking
100+ Head-Fier
- Joined
- Aug 17, 2013
- Posts
- 109
- Likes
- 29
Hi Fiio,
Are you guys actually working on a mac version for the firmware upgrade? You said you had been working on it since September last year, it's mid April now and there's still nothing. I don't think this is fair as there are many people like myself who own a macbook.
Are you guys actually working on a mac version for the firmware upgrade? You said you had been working on it since September last year, it's mid April now and there's still nothing. I don't think this is fair as there are many people like myself who own a macbook.
Dear friend,Hi Fiio,
Are you guys actually working on a mac version for the firmware upgrade? You said you had been working on it since September last year, it's mid April now and there's still nothing. I don't think this is fair as there are many people like myself who own a macbook.
No, we could not provide the tool for updating the firmware of BTR3 in MAC system because the supplier of the chip did not offer that tool for MAC system to us. Not sure why you are misunderstanding.
But a user provide a method for updating in linux or MAC: Click here
You may have a try if you would prefer.
Best regards
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
Users who are viewing this thread
Total: 2 (members: 0, guests: 2)
- Home
- Forums
- Head-Fi Special Forums
- Premier Sponsor Forums and Sponsor Forums
- Premier Sponsor Forums
- FiiO