[CaptHowie]

Hey Everyone,
Just to let you know, i've built two before this one. They both didn't work. I'm now pretty angry. I'm hoping to get this one actually working. Ill post pics soon but here is my current problem. Basically, no sound is coming out of the amp at all. The grounds are hooked up correctly and so is everything else according to Tangent's guide and the LED lights up and i'm getting correct DC voltages on each side so I don't know what the problem is. Any suggestions?

-CaptHowie

 

[nsx_23]

We'd need to see pics to have an idea why its not working.

 

[sugrhigh]

Can you try having the source playing through the amp and checking voltages and signals on the output jack?

My idea is that the fact there is voltage on both sides of the amp means there is continuity, but the actual signal may not be passing through the op-amp correctly...

 

[diredesire]

Shoot up a pic, you'll have a response in no time

Is your amp already cased up? If it is, trouble shoot it outside of the case.

Are you powering it via battery or AC/DC?

 

[CaptHowie]

I disassembled it because the board broke [F*%K]. Anyway, im doing a rebuild tonight and ill tell you all how I go. If I have any problems [probably will] ill post it here.

-CaptHowie