Final DX6000 - Open-Back Dynamic Driver Headphone

Apr 21, 2025 at 8:47 PM Thread Starter Post #1 of 8

XERO1

Headphoneus Supremus
Joined
Aug 25, 2014
Posts
3,017
Likes
6,128
Location
SoCal
ezgif-21d8870ba9cec8.jpg

Specs:
Driver type: Dynamic

Driver size: TBA

Driver materials: Magnesium alloy cone w/ foamed silicone resin surround

Housing material: Aluminum-magnesium alloy

Sensitivity: 83dB/mW

Impedance: 47Ω (1kHz), 480Ω (20kHz)

Weight: 363g

MSRP: ¥248,000 / $1999 / €1,999 / £1,899

Available on 4-28-2025
______________________________

https://final-inc.com/products/dx6000-jp
https://musictech.com/news/gear/final-dx6000-headphones-debut/
______________________________

These could be good! :L3000:

But at only 83dB/mW and with a wonky impedance, they will need a pretty beefy amp to drive them well.
 
Last edited:
Apr 22, 2025 at 12:27 AM Post #2 of 8
83 dB/mW is Susvara territory! And that impedance curve is something; it seems high output impedance amps will boost treble instead of bass on these headphones. I'm certainly curious. The D8000 Pro and D8000 DC (non-Pro) weren't for me, but I enjoyed the D8000 DC Pro.
 
Apr 25, 2025 at 2:45 PM Post #3 of 8
But at only 83dB/mW and with a wonky impedance, they will need a pretty beefy amp to drive them well.
The sensitivity shouldn't be a problem in the treble as it peaks around 85-75db so you'd only need about 1mw at 300ohms for the treble, high oi amps might be a problem however.
 
Apr 25, 2025 at 10:22 PM Post #5 of 8
*Since the ear pads are fixed to the driver unit with special screws, we will replace them at our company. If you replace them yourself, they will not be covered by the product warranty. *For ear pad replacement, please apply through SUPPORT (repair application).


*The "transient coil system" provides a rated impedance of 47 Ω @ 1 kHz, but at 20 kHz the impedance rises to 480 Ω. Therefore, we recommend using this product with a stationary amplifier with sufficient power capacity to handle high impedance, rather than a portable device.
 
Last edited:
Apr 27, 2025 at 3:52 PM Post #7 of 8
It should be available for sale in Japan tomorrow (4-28-25).
 

Users who are viewing this thread

Back
Top