[THESANTINI]

so the cmoybb bom calls for:
 
 

[size=8pt] CB_L, CB_R[/size]	[size=8pt] WIMA 0.068uF Polyester Film Capacitor, 63V, 5%[/size]	[size=9.5pt] [size=8pt]505-MKS20.068/63/5[/size][/size]	[size=8pt]  [/size]	[size=10pt] $0.25[/size]	[size=10pt] 2[/size]	[size=10pt] $0.50[/size]
[size=8pt]    CB_L, CB_R[/size]	[size=8pt] Kemet 0.082uF Polyester Film Capacitor, 63V, 5% 10%[/size]	[size=9.5pt] [size=8pt]80-MMK5823M63J01L4[/size][/size]	[size=10pt]  [/size]	[size=10pt] $0.22[/size]	[size=10pt] 0[/size]	[size=10pt]  [/size]
[size=8pt]    CB_L, CR_R[/size]	[size=8pt] WIMA 0.1uF Polyester Film Capacitor, 63V, 5%[/size]	[size=9.5pt] [size=8pt]505-MKS2.1/63/5[/size][/size]	[size=8pt]  [/size]	[size=10pt] $0.25[/size]	[size=10pt] 0[/size]	[size=10pt]  [/size]
[size=8pt]    CB_L, CB_R[/size]	[size=8pt] Panasonic 0.082uF Polyester Film Capacitor, 50V, 5% 10%[/size]	[size=9.5pt] [size=8pt]667-ECQ-V1H823JL[/size][/size]	[size=10pt]  [/size]	[size=10pt] $0.29[/size]	[size=10pt] 0[/size]	[size=10pt]  [/size]
[size=8pt]    CB_L, CR_R[/size]	[size=8pt] CDE Polyester Film Capacitor, 50V, 5%[/size]	[size=9.5pt] [size=8pt]598-DSF050J823[/size][/size]	[size=8pt]  [/size]	[size=10pt] $0.76[/size]	[size=10pt] 0[/size]	[size=10pt]  [/size]

 
I have:
 

[size=small]CAP .1UF 50V 10% CER RADIAL[size=small]http://parts.digikey.com/1/parts/64964-cap-1uf-50v-10-cer-radial-c320c104k5r5ta.html[/size][/size]

 





 I have:  1.0 UF 63v 5% vishay polyester film cap
http://www.mouser.com/ProductDetail/Vishay-BC-Components/BFC237012105/?qs=sGAEpiMZZMvOcEq4GH1AAnDObYAgO69msMALw4kx6Do%3D 1.0 
 

[size=small]CAP 1.0UF 63V METAL FILM BOX http://parts.digikey.com/1/parts/84099-cap-1-0uf-63v-metal-film-box-bfc237012105.html[/size]

 
I think the first part that I have Cap .1UF 50V 10% cer radial should work, so if that is the case, awesome. If it is indeed a go ahead and solder, I'd like to know the why. While I am asking questions what does CB stand for?
 
 

 
 
 

 

[Avro_Arrow]

The 0.1uF Ceramic will sound awful.
Ceramics are for RF bypassing and should
never be used for audio.
Stick with the Polyester.
 
CB = Capacitor Bass

 

[Avro_Arrow]

Before we all get confused, maybe you should say
which cap you are considering for which position...

 

[THESANTINI]

I am hoping to use: Cap .1UF 50V 10% cer radial for the CB-R and CB-L.
 
Quote:

Before we all get confused, maybe you should say
which cap you are considering for which position...

 

[THESANTINI]

Quote:

 
Ceramics are for RF bypassing and should
never be used for audio.
Stick with the Polyester.
 
 

I am checking with the BOM for the CMOYBB and it specifically calls for 

[size=8pt] C3+, C3-, C4+, C4-[/size]

[size=8pt] 0.1uF, 50V Multilayer Ceramic Capacitor[/size]

 
for the above. Kind of strange why they are asking for ceramic after understanding the inherent problems with them. Thanks.

 

[Avro_Arrow]

They are being used correctly for RF bypassing in that position.
 
Quote:

Quote:

 
Ceramics are for RF bypassing and should
never be used for audio.
Stick with the Polyester.
 
 

I am checking with the BOM for the CMOYBB and it specifically calls for 

[size=8pt] C3+, C3-, C4+, C4-[/size]

[size=8pt] 0.1uF, 50V Multilayer Ceramic Capacitor[/size]

 
for the above. Kind of strange why they are asking for ceramic after understanding the inherent problems with them. Thanks.

 

[Avro_Arrow]

CB-L and CB-R need to be Polyester, not Ceramic
 
Quote:

I am hoping to use: Cap .1UF 50V 10% cer radial for the CB-R and CB-L.
 
Quote:

Before we all get confused, maybe you should say
which cap you are considering for which position...