LawnGnome
Banned
- Joined
- Apr 26, 2007
- Posts
- 1,201
- Likes
- 14
XtremeMusic Recapped with mostly Panasonic FM's and a few FC's.
ONLY recapped the caps used for power filtering and the caps on the digital side. Did NOT recap any caps for the opamps, power/filter/bypass or otherwise. They are all stock still.
So I did not touch any capacitors in the signal path, and I did not change any capacitors that directly fed the opamps.
All the capacitor capacitance values kept the same except for the power filter caps which were increased. Most new caps now have double their rated voltage specs though.
Here are the results, Note, this is in a a system with a psu I completely recapped with panasonic and united chemicon capacitors, and should have very stable rails. My DFI motherboard also has 100% Chemicon capacitors.
People with boards with cheaper caps, or cheap stock to midrange powersupplies will see more of a benefit from this mod. Basically, the dirtier the power coming from your PCI slot, the more this will help.
[size=medium]XFi 24bit 48khz Loopback[/size]
UNMODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.8Excellent
Dynamic range, dB (A): 101.5Excellent
THD, %: 0.0021Excellent
IMD + Noise, %: 0.0039Excellent
Stereo crosstalk, dB: -99.9Excellent
IMD at 10 kHz, %: 0.010Very good
MODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.9Excellent
Dynamic range, dB (A): 101.5Excellent
THD, %: 0.0018Excellent
IMD + Noise, %: 0.0034Excellent
Stereo crosstalk, dB: -101.1Excellent
IMD at 10 kHz, %: 0.0087Very good
[size=medium]XFi 24bit 96khz Loopback[/size]
UNMODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.8Excellent
Dynamic range, dB (A): 101.5Excellent
THD, %: 0.0022Excellent
IMD + Noise, %: 0.0039Excellent
Stereo crosstalk, dB: -97.8Excellent
IMD at 10 kHz, %: 0.0099Very good
MODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.9Excellent
Dynamic range, dB (A): 101.6Excellent
THD, %: 0.0017Excellent
IMD + Noise, %: 0.0032Excellent
Stereo crosstalk, dB: -98.7Excellent
IMD at 10 kHz, %: 0.0080Very good
Also, what you can't see in the charts, but you can see in the graphs, is that many of the random sharp peeks in distortion and noise are now gone.
Also, the performance may improve slightly once the capacitors get worked in, and go through a couple power cycles.
I will update this as I replace other capacitors, and if anything changes with a bit of burn in.
ONLY recapped the caps used for power filtering and the caps on the digital side. Did NOT recap any caps for the opamps, power/filter/bypass or otherwise. They are all stock still.
So I did not touch any capacitors in the signal path, and I did not change any capacitors that directly fed the opamps.
All the capacitor capacitance values kept the same except for the power filter caps which were increased. Most new caps now have double their rated voltage specs though.
Here are the results, Note, this is in a a system with a psu I completely recapped with panasonic and united chemicon capacitors, and should have very stable rails. My DFI motherboard also has 100% Chemicon capacitors.
People with boards with cheaper caps, or cheap stock to midrange powersupplies will see more of a benefit from this mod. Basically, the dirtier the power coming from your PCI slot, the more this will help.
[size=medium]XFi 24bit 48khz Loopback[/size]
UNMODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.8Excellent
Dynamic range, dB (A): 101.5Excellent
THD, %: 0.0021Excellent
IMD + Noise, %: 0.0039Excellent
Stereo crosstalk, dB: -99.9Excellent
IMD at 10 kHz, %: 0.010Very good
MODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.9Excellent
Dynamic range, dB (A): 101.5Excellent
THD, %: 0.0018Excellent
IMD + Noise, %: 0.0034Excellent
Stereo crosstalk, dB: -101.1Excellent
IMD at 10 kHz, %: 0.0087Very good
[size=medium]XFi 24bit 96khz Loopback[/size]
UNMODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.8Excellent
Dynamic range, dB (A): 101.5Excellent
THD, %: 0.0022Excellent
IMD + Noise, %: 0.0039Excellent
Stereo crosstalk, dB: -97.8Excellent
IMD at 10 kHz, %: 0.0099Very good
MODDED
Frequency response (from 40 Hz to 15 kHz), dB: +0.02, -0.10Excellent
Noise level, dB (A): -101.9Excellent
Dynamic range, dB (A): 101.6Excellent
THD, %: 0.0017Excellent
IMD + Noise, %: 0.0032Excellent
Stereo crosstalk, dB: -98.7Excellent
IMD at 10 kHz, %: 0.0080Very good
Also, what you can't see in the charts, but you can see in the graphs, is that many of the random sharp peeks in distortion and noise are now gone.
Also, the performance may improve slightly once the capacitors get worked in, and go through a couple power cycles.
I will update this as I replace other capacitors, and if anything changes with a bit of burn in.