Do any of you know this brand or can you say something about this Dac / Dap?
Portable headphone amplifier 2x 1.5 W
Automatic load impedance detection and gain adjustment
Dual mono ‐ fully balanced topology
Media player, streamer
USB audio 2.0 DAC ‐ any format or resolution supported
SABRE ES9038PRO ‐ 136dB signal to noise ratio
Separate L and R +/‐ 15V power supplies
Music on demand services ‐ Tidal, Qobuz, etc.
R2R ‐ 256 steps pure analog volume control
Analog and digital optical inputs
Dual AMOLED display for VU‐meter, spectrum, cover art
Voice commands
Wireless charging
10.000 mA custom made battery
Advanced music recognition engine, retrieving cover art info even
when using analog input
170x82x18 mm
Audio performance
DAC section
‐ SNR: ‐ 136 dB
‐ THD: ‐ 122 dB
‐ maximum resolution :32/768
‐ analog and optical digital inputs
Amplifier section
‐ better than ‐132 dB SNR @ max. 1.5W rms
Electrical performance
‐ Audio clocking max jitter 200fs, ‐138 dBc phase noise
‐ Audio output power supplies max noise: better than 10uVrms
‐ DAC power supplies max noise: better than 1 uVrms
‐ Texas Instruments WLAN/ Bluetooth
Features
‐ Sabre ES9038PRO
‐ USB DAC functionality with music recognition engine
‐ analog and optical digital inputs with music recognition engine
‐ internal SD card socket plus 2x external SD card sockets
‐ output R2R volume with CMOS switches, eliminating the need to decrease the SNR by digitally altering
the volume
‐ WLAN a/b/g/n, Bluetooth
‐ OLED display
‐ wireless charging
‐ 10.000 mA battery
‐ dual mono design
‐ separate L and R audio power supplies for each stage
‐ 2x 14V positive and negative power supplies for the output stages
‐ automatic measurement of the headphone impedance for adjusting the gain according to the load,
between 8 to 600 Ohm
‐ aviation grade aluminum housing
![borgaudio float.jpg borgaudio float.jpg](https://cdn.head-fi.org/a/11413352.jpg)
Portable headphone amplifier 2x 1.5 W
Automatic load impedance detection and gain adjustment
Dual mono ‐ fully balanced topology
Media player, streamer
USB audio 2.0 DAC ‐ any format or resolution supported
SABRE ES9038PRO ‐ 136dB signal to noise ratio
Separate L and R +/‐ 15V power supplies
Music on demand services ‐ Tidal, Qobuz, etc.
R2R ‐ 256 steps pure analog volume control
Analog and digital optical inputs
Dual AMOLED display for VU‐meter, spectrum, cover art
Voice commands
Wireless charging
10.000 mA custom made battery
Advanced music recognition engine, retrieving cover art info even
when using analog input
170x82x18 mm
Audio performance
DAC section
‐ SNR: ‐ 136 dB
‐ THD: ‐ 122 dB
‐ maximum resolution :32/768
‐ analog and optical digital inputs
Amplifier section
‐ better than ‐132 dB SNR @ max. 1.5W rms
Electrical performance
‐ Audio clocking max jitter 200fs, ‐138 dBc phase noise
‐ Audio output power supplies max noise: better than 10uVrms
‐ DAC power supplies max noise: better than 1 uVrms
‐ Texas Instruments WLAN/ Bluetooth
Features
‐ Sabre ES9038PRO
‐ USB DAC functionality with music recognition engine
‐ analog and optical digital inputs with music recognition engine
‐ internal SD card socket plus 2x external SD card sockets
‐ output R2R volume with CMOS switches, eliminating the need to decrease the SNR by digitally altering
the volume
‐ WLAN a/b/g/n, Bluetooth
‐ OLED display
‐ wireless charging
‐ 10.000 mA battery
‐ dual mono design
‐ separate L and R audio power supplies for each stage
‐ 2x 14V positive and negative power supplies for the output stages
‐ automatic measurement of the headphone impedance for adjusting the gain according to the load,
between 8 to 600 Ohm
‐ aviation grade aluminum housing