[johnwmclean]

I’ve been looking for some nice feet, Soundcare have some really nice designs - but way too pricey. Not after spikes/cones either, can anyone recommend a good supplier?

Similiar to this
http://www.soundcare.no/store-bilder/foot-on.jpg

 

[alwayshungry]

I ordered a knob from Michael at DIY Enclosures for my B22. Service was very fast and the knob is high quality.

John,
for my case feet I've been looking at these but at $70 for a set of 8, I may end up going with these or some rubber feet from ebay.

 

[MisterX]

Quote:

Originally Posted by johnwmclean /img/forum/go_quote.gif I’ve been looking for some nice feet, Soundcare have some really nice designs - but way too pricey. Not after spikes/cones either, can anyone recommend a good supplier? Similiar to this http://www.soundcare.no/store-bilder/foot-on.jpg

Altronics - Your One Stop Audio Visual & Electronics Supplier ?

 

[ting.mike]

Quote:

Originally Posted by El_Doug /img/forum/go_quote.gif my power supply (toroids + s22) is in a separate 330x230x80. complete with spikes, im inadvertently emulating the look of an apache, to a degree. my amp board heatsinks are only 1 inch tall, but they do more than surpass the thermal requirements of the amp.

Interesting.. post some pictures maybe?

 

[El_Doug]

Once I get my FPE order in, I'll mock up the chassis (with nothing inside) so you can have a looksie

 

[johnwmclean]

Quote:

Originally Posted by alwayshungry /img/forum/go_quote.gif for my case feet I've been looking at these but at $70 for a set of 8, I may end up going with these or some rubber feet from ebay.

Quote:

Originally Posted by MisterX /img/forum/go_quote.gif Altronics - Your One Stop Audio Visual & Electronics Supplier ?

Thanks guys, great links!

 

[ting.mike]

Quote:

Originally Posted by El_Doug /img/forum/go_quote.gif Once I get my FPE order in, I'll mock up the chassis (with nothing inside) so you can have a looksie

sweet..

 

[dbfreak]

The height of my enclosure will be 3" inches. I'm using 1/2" standoffs and 1.5" heatsinks. Completed the front panel last night:

 

[ting.mike]

that looks nice.. which volume knob is that??

the picture looks too dark though.. can't see the texture of the front plate.

 

[dbfreak]

The plate is a smooth, high-gloss black acrylic. The volume knob was purchased from an ebay merchant from Taiwan.

 

[compuryan]

somebody mentioned mnpctech feet earlier. they have some really cool stuff on the actual mnpctech website. I especially like the "diamond knurl" check it out:
Mnpctech Case Mods, 120mm Fan Grills, Rad Grillz, led fans, Case Feet, Carbon Fiber Film

 

[ShinyFalcon]

If you're looking for a 3D drawing program to plan out your builds, I found about Google SketchUp. I thought it pretty useful and very basic, but it's probably not for everyone.



And as for two Beta22s fitting in my particular theoretical case, I forgot to factor in the irregularities, so it definitely won't fit in that 8" x 5.7" x 2.8" case.

 

[dbfreak]

The Black Anodize Aluminum Case Feet look interesting.

 

[dbfreak]

Quote:

Originally Posted by ShinyFalcon /img/forum/go_quote.gif If you're looking for a 3D drawing program to plan out your builds, I found about Google SketchUp. I thought it pretty useful and very basic, but it's probably not for everyone. And as for two Beta22s fitting in my particular theoretical case, I forgot to factor in the irregularities, so it definitely won't fit in that 8" x 5.7" x 2.8" case.

Google SketchUp is a very nice progam. Unfortunately, by the time I master it, it will have already expired.

 

[smeggy]

The feet on my EHHA case are blackwood square blocks with felt stick on pads for surface protection. Looks good with a slim rectangular case.