juswyq
100+ Head-Fier
- Joined
- Sep 14, 2008
- Posts
- 146
- Likes
- 0
I'm having a problem with my Audioengine A5s - the volume is unbalanced between left and right speakers.
Quite sure it's not the pot thats spoilt as i just replaced it.
On the A5's main PCB, I measured the AC voltage between the input left channel and ground (~83mV) and input left channel and ground (~66mV). I measured after the input capacitor and resistor and before the potentiometer.
This was playing a sine wave at the source. What could be causing this difference? Swapping left and right channel at the source makes no difference in the voltage reading.
Thanks!
Quite sure it's not the pot thats spoilt as i just replaced it.
On the A5's main PCB, I measured the AC voltage between the input left channel and ground (~83mV) and input left channel and ground (~66mV). I measured after the input capacitor and resistor and before the potentiometer.
This was playing a sine wave at the source. What could be causing this difference? Swapping left and right channel at the source makes no difference in the voltage reading.
Thanks!
