ssingh0
500+ Head-Fier
- Joined
- Nov 12, 2003
- Posts
- 527
- Likes
- 11
Dear Sir ,
We have another DAC , Citypulse which completely beaten Zhaolu . It have upsampling 192 function and not by op amp anymore . It use a FET module , so if you don't have a Hi End pre amp , I'll highly recommended you to direct into your power amp . I also include remote control function .
DA7.2x Product descriptions
A---Unit can select 110v or 220v inside .
B---It support 44.1 to 192KHZ as input.
C---function of fx2-- -With 44.1KHZ input spdif --just switch on fx2 will up to 24-192KHZ .
For those input source already upsampling spdif to 96khz or 192khz
should using fx2 with switch off only
DA7.2x Specification
Digital coaxial input ......input level 0.5vp-p
Input impedance.............75ohm
Digital optical input......input level - 15 dbM
Digital encoder.............24 bit / 192 KHz
D/A converter..............24 bit / 192 KHz
Audio output...............2.0v (1kHz, 0db)
Xlr audio output...........4.0v (1kHz, 0db)
S/N............................113db
Dynamic range.............116db
THD..........................0019%
Frequency response.......15Hz - 58kHz
Audio input.................200mv (47k ohm)
Earphone impedance......32ohm - 600ohm
Power supply..............AC 220v(+/- 10%) 50/60Hz
Max power dissipation...60W
Dimension..................250x280x62mm
N.weight....................4.5kg
I quote for your consideration :
Citypulse $320.
clock mods is $30.
speedpost is $70.
TOTAL is $420.
I try many mods for the power supply but don't have significant improvement , so power supply is not recommended.
We have another DAC , Citypulse which completely beaten Zhaolu . It have upsampling 192 function and not by op amp anymore . It use a FET module , so if you don't have a Hi End pre amp , I'll highly recommended you to direct into your power amp . I also include remote control function .
DA7.2x Product descriptions
A---Unit can select 110v or 220v inside .
B---It support 44.1 to 192KHZ as input.
C---function of fx2-- -With 44.1KHZ input spdif --just switch on fx2 will up to 24-192KHZ .
For those input source already upsampling spdif to 96khz or 192khz
should using fx2 with switch off only
DA7.2x Specification
Digital coaxial input ......input level 0.5vp-p
Input impedance.............75ohm
Digital optical input......input level - 15 dbM
Digital encoder.............24 bit / 192 KHz
D/A converter..............24 bit / 192 KHz
Audio output...............2.0v (1kHz, 0db)
Xlr audio output...........4.0v (1kHz, 0db)
S/N............................113db
Dynamic range.............116db
THD..........................0019%
Frequency response.......15Hz - 58kHz
Audio input.................200mv (47k ohm)
Earphone impedance......32ohm - 600ohm
Power supply..............AC 220v(+/- 10%) 50/60Hz
Max power dissipation...60W
Dimension..................250x280x62mm
N.weight....................4.5kg
I quote for your consideration :
Citypulse $320.
clock mods is $30.
speedpost is $70.
TOTAL is $420.
I try many mods for the power supply but don't have significant improvement , so power supply is not recommended.