NAD 3130

General Information

PRE·AMP SECTION:

Phono input:

Input impedance (R and C): 47kohms/100pF

Input sensitivity: MM1 kHz: 2.5mVref. 0.5V
MC 1 kHz: MC 200 mV

Signal To Noise Ratio: MM 76dB ref. 5mV
MC 76dB ref. 0.5mV

RIAA Response Accuracy: ±0.5dB

Line level inputs:

Input impedance: (R and 0) 15kohms/100pF

Input sensitivity (ref. lW): 150mV

Maximum input signal: >10V

Signal/Noise ratio (A-weighled ref lW):85dB

Frequency Response: 20Hz - 20kHz / ±0.5dB

Line level outputs:

Output impedance:preamp 800 ohms
Tape Source Z + 1kHz Ohms

Maximum Ouput Level: Preamp 8V

Tone controls:

Treble: ±7dB at 10kHz

Bass: ±7dB at 100Hz

Bass EQ: +3dB at 70Hz
+6dB at 40Hz
-3dB at 12Hz - 12dB/octave

POWER AMP SECTION:

Continuous output power into 8 ohms: 30W(15dBW)

Rated distortion (THD 20Hz - 20kHz) 0.03%

Clipping power (maximum continous power per channel): 45W

IHF Dynamic headroom at 8 ohms: +3dB

IHF dynamic power (maximum short term term power per channel): 8 ohms 60W
4 Ohms 70W
2 Ohms 85W

Input impedance: 22k Ohms

Input sensitivity (for rated power into 8ohm): 850mV

PHYSICAL SPECIFICATIONS:

Dimensions (W x H x D) 17x15x5

Net weight: 20 Pounds

Minimum power 30 WRMS per channel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.

Comments

There are no comments to display.
Top