Search results for query: *
- Users: tonybuild
- Order by date
-
Home-Made IEMs
This is short video of making it. Dont pay attention on the drivers On the video . In the beginning, I was experimenting with twfk. But I end up with sonion 2389d- tonybuild
- Post #16,063
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
I mixed Egger with white resin pigment. I bought it in the Michael’s store .- tonybuild
- Post #16,062
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Hi again, in this model ( white and wood ) i use sonion 2389D and sonion 38d1 woofer . I wired 5ohm resistor and 22 cap on one of the 2389(no center pad), and 2.2 cap on the other 2389(no center pad) . On the woofer i wired 20 ohm resister reversed . 2389d,12 mm tube with green damp at 3-4...- tonybuild
- Post #16,061
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
I will post today or tomorrow- tonybuild
- Post #16,046
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Do You mean how i made it,or what i used ?- tonybuild
- Post #16,041
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
This is my 4 drivers that i told you guys , i just finished today:)- tonybuild
- Post #16,038
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Uhh nice ,look at you 👍 . It got some futuristic vibe. how long you cured it under the lamp?- tonybuild
- Post #16,037
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Yeah, i actually wanted to order them . Can get better results with E50dt ?- tonybuild
- Post #16,035
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
O nice . May be i can use Raq as a low and mid . Guys,post some pics of your iems . Im going to finish my New 4 driver setup this week with some wood face plates,and ill post it :)- tonybuild
- Post #16,033
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Thank you I like the sound of it . Also,it was loud lil bit and i put there 5R on one of the 2389, and now i got 2khz dent lol . I like to hear details without sharpness ,also it can be my green damp. Next time ill try 3 uf for highs . Also, at this point ive tried nothing besides the...- tonybuild
- Post #16,031
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
This is my latest fr graph for the 4 drivers setup . It got sonion 38 and sonion 2389d . I reversed polarity on woofer ,because they were canceling each other . And no center pad, i liked the sound of 22 uf on one of the 2389, and 2.2 uf on other one of 2389 . All caps i ran with positive wire...- tonybuild
- Post #16,029
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Man , thank you . Speaking of myself, i try to remember as much i can , but lots of time i just forgetting the stuff i learned here ,specially on polerity and wiring . But i got better ! Also swtnate and other people Helped with crossovers and tuning. And i still got lots of questions lol- tonybuild
- Post #16,024
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Lol I don’t know what is leakage Whatever you say, I’m for it:)- tonybuild
- Post #16,013
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
It 38d1xj . I used 20 ohm resister on it . I like the volume of it . Also I reverse the polarity on 38 . I thought I don’t need it, but I saw something crazy happening on the graph that look like cancellation . Also ,he is my coffee time drawing ✍️ lol I want to try and see if 1 is...- tonybuild
- Post #16,007
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
thats what im about to do as well:)- tonybuild
- Post #16,003
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Thanks man! Im really bad with math, sometimes when im confused, i just trust my ears . What if i wire one 2389 center tap, and other one normally, since ill get mids from one of 2389 ? Also , is it really matter if i put yellow damp close to driver or far from the driver(sonion 38) ...- tonybuild
- Post #16,001
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Do you think I should wire them separately? Also,should I always run caps with positive? Because on the graph 📈 I don’t see difference. I was planning to run first 2389 with 22 uf cap and second with 2.2 or 1 uf. I spent sometime on how to wire the 2389 , because I don’t want over heat the...- tonybuild
- Post #15,998
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
yeah, i noticed that even when you cut 2 mm off, it shows big difference.- tonybuild
- Post #15,996
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
I’ve changed it. I just ran negative terminals separately with cap . Middle stays the same. Also, i do feel i need lil more mid frequencys, Since i run 2389d with sonion 38 . well, lets see .:)- tonybuild
- Post #15,995
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
O interesting:) 12 mm tube or 14 mm ? I tried 14 mm , and its seem to working. Lil bit loud- tonybuild
- Post #15,992
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Hi guys , i just got some sonion 2389d . I think it should be wired like that right? :)- tonybuild
- Post #15,990
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Wow. Thank you guys. Its helpful- tonybuild
- Post #15,982
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Hi guys, what is the best glue for gluing drivers to the wall inside the shell? I made ciem for my friend, and after 6 months, and he told me that the drivers unglued from the tubes and fall off . I usually use egger to glue them , but sometimes its pretty fragile . Specially if you...- tonybuild
- Post #15,978
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Actually,i just rebuilt the one that got yellow, and look much better and fits great.- tonybuild
- Post #15,967
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
- tonybuild
- Post #15,958
- Forum: DIY (Do-It-Yourself) Discussions