I beg you, tell me, who knows. Nowhere did I find information about soundaware d300ref - what should be the external clock frequency for external clocking - 50 ohms or 75 ohms? Is the signal sinusoidal or square wave? Probably no soundaware support, no response for a week now. I would be...

haven't found any information about the d300ref anywhere - what should the external clock be - 50 ohms or 75 ohms? Is the signal sinusoidal or square?

thanks for the tips! As for the acoustics, I recently also changed all the wires inside and on the crossover board, and also glued the walls of the housing with bitumen. The effect was very good! I used the same wires as from the amplifier to the acoustics, which I also bought on the advice of...

@FredA I ask you to help me make my system, which is 80% assembled according to your advice (for which I am very grateful to you), become even better)) I have a Morion watch from Queen. Now I'm considering the option After dark. I've read your feedback that this replacement sounds like a big...

I am very grateful to everyone for the large number of tips that have helped me a lot! Now I'm working on a dedicated line, and I was thinking about acquiring Holton DC Blocker One R4. I have a question, will this really have an effect when used to power an amplifier, and won't it limit the...

@DACLadder Thank you very much!!! Now everything works! But interestingly, I looked at the instructions in which the firmware of both modules is prescribed, understanding the standard instructions, and nowhere did I see that for audio gd r7 he mkii you need to download the firmware to only one...

Thanks! I'll do it now! Does reboot the DAC just mean turning it off and on?

Perhaps the reason is that it was not necessary to update the module that is in the photo below? Maybe he is responsible for iis? And what should I do now, do I need the firmware that was downloaded on this module earlier to get it back?

With your help, things are really moving forward)) Firstly, I updated the upper module in the photo, but the k7 ru mkii audio saw stopped seeing the clock. Then I updated the second module and the sound from iis disappeared, but the clock appeared. With AES and optics, there is sound....

Xilinx is not an easy task at all! But after many repeated attempts, it was finally possible to update both modules! however, the iis signal disappeared... Everything is fine at the optical input. Of course, while I was programming, I connected and disconnected the device several times, I don't...

Friends, in search of a solution, I switched the Xilinx blaster to another module inside the device, and the firmware loaded! But the instructions say that there are two modules inside the device, but it is impossible to update the second one for the reasons mentioned earlier...

Thanks for the tips! I have tried Windows 7 and Windows 10, also from personal computers and from a laptop, for 32 and 64 digits. I always see the error previously mentioned in the message. Now I do not know what to do next. It is possible that the Xilinx driver failed to load because the...

xilinx blaster is connected, green and orange indicators are lit

@DACLadder, I am very grateful to you and @FredA for all the valuable feedback and advice that I read very carefully earlier! As a result, I bought gdr 7he mkII audio and used it via IIS, and the watch, power supply and a lot of cables were bought on the recommendation of @FredA! I am also very...

Clarification: When I installed the software, the Xilinx blaster was not connected to my audio gd r7 he MKII. Maybe the Xilinx blaster should have been connected then?

Friends, I ask you to help. Reading great reviews and rush to update CDPA. I was unable to install the program on a desktop computer, the download stops at 83%. On the advice in the messages of this forum, I tried to do the same on the laptop. The software loaded successfully, the Xilinx blaster...

Friends! I turned to Kingwa about the fact that after updating the firmware on the audio gd r7 he mkii, the bass became noticeably less. For me, in most cases, this is very noticeable. Kingwa's answer: "I will try to add more bass in the next firmware version." Considering how Kingva treats us...

I have read the previous posts, but there is no such information. I have Windows 10, and if anyone has encountered a similar problem, please tell me what solution you have found.

Friends, tell me, please, I have a problem after updating the audio gd r7 he mkii firmware. I downloaded the R7 MK2_N firmware, then downloaded the R7 MK2_PLL_N firmware to optimize the operation of the external clock. Both firmware were successfully downloaded. But the audio gdr 7 he mkii does...