Search results for query: *
- Users: kalstein
- Order by date
-
K
Recording Impulse Responses for Speaker Virtualization
@jaakkopasanen Are you not interested in hrtf simulation? You can get a head model using the iPhone's lidar sensor, and there are projects like mesh2hrtf. Direct measurement may be more error-prone. And accessibility is much better.- kalstein
- Post #881
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
How can I use webcam.html ? I don`t have a webcam, so I used droidcam app. that app makes my phone using as webcam. And I opened webcam.html (with MS edge), there is no reaction. Is it working with real webcam ?- kalstein
- Post #694
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I have same error. I think you can test it new os system. For example virtualbox.- kalstein
- Post #427
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I changed my speaker from bose c20 to psb xb. and recording again. normal case is ok. but room correction case has error. (It is a message that I have seen before.) (venv) C:\Users\JHJ\Impulcifer>python impulcifer.py --test_signal="data/sweep-6.15s-48000Hz-32bit-2.93Hz-24000Hz.pkl"...- kalstein
- Post #412
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
yes, i meant that. thanks for sharing your experience.- kalstein
- Post #410
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
left and right speaker. Of course, I know that the data is bound to be different due to room acoustics.- kalstein
- Post #407
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I think balance is affect to headphone record. Dosen't it? I said about speaker record.- kalstein
- Post #405
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I think everyone`s room left and right fr is different. so, how about putting the same speaker data on the left and the right? then can the result of room acoustic be applied relatively well?- kalstein
- Post #403
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
Normal case has same sound i think. But,'Harman Room Target' is completely different. Previously, only unpleasant reverb sounds in the bass range were heard. This time, the correct bass is played.- kalstein
- Post #401
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I don't know why... that's just result.- kalstein
- Post #400
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I think Creative Sxfi dosen`t fit to measure audio signal. Below plot is measured by Topping D50s today. Thanks a lot.- kalstein
- Post #396
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I don't like sxfi 3d sound so much. Because that sound has too many reverb.- kalstein
- Post #390
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
Don`t worry about that ;)- kalstein
- Post #388
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I changed branch. but same result. C:\Users\JHJ\Impulcifer>venv\Scripts\activate (venv) C:\Users\JHJ\Impulcifer>git checkout reverb-management Switched to a new branch 'reverb-management' Branch 'reverb-management' set up to track remote branch 'reverb-management' from 'origin'. (venv)...- kalstein
- Post #386
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I am using 'sxfi amp'. I use only bose speaker.- kalstein
- Post #385
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
Thanks for your replay. How did you make plot? I cannot check the plot. I already reported https://github.com/jaakkopasanen/Impulcifer/issues/51. I used parametes like this. "python impulcifer.py --test_signal="data/sweep-6.15s-48000Hz-32bit-2.93Hz-24000Hz.pkl" --dir_path="data/my_hrir"...- kalstein
- Post #382
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
https://drive.google.com/file/d/1AHp6Kh9nwnN7nGvBzDRNCnqYrSDnbIeX/view?usp=sharing (It will not share after 3 days...) I made room-FL,FR-left,right.wave file from Audacity using 1 channel export. Should I use another method?- kalstein
- Post #379
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I want to apply 'room correction'. but it happens error. Traceback (most recent call last): File "impulcifer.py", line 513, in <module> main(**create_cli()) File "impulcifer.py", line 59, in main plot=plot File "C:\Users\JHJ\Impulcifer\room_correction.py", line 83, in...- kalstein
- Post #376
- Forum: Sound Science
-
K
Recording Impulse Responses for Speaker Virtualization
I have a question about 'room correction' part. Is that additional information for making 'hesuvi.wav' or standalone solution for room correction like REW ?- kalstein
- Post #371
- Forum: Sound Science