Looking forward to attending tomorrow!

Hi all! Semester is starting soon for me, so hopefully these sell quick! Drop + THX AAA 789 Amp timestamps: https://imgur.com/a/YAlf0ZB bought this directly from Drop at the end of 2019, in pristine condition, used this to power my modded balanced 600 ohm dt880s. Looking for $200 +...

Hi all! Semester is starting soon for me, so hopefully these sell quick! Spare t50rp mk3 parts timestamps: https://imgur.com/a/pYLDCR7 I have the stock pads, stock cups, & a spare driver leftover back from when I was modding. Will ship this as a bundle because I have no other use for the...

I'm unable to do this as well. Perhaps this is a site-wide bug?

Out of curiosity, has anyone tried the eikon suede pads with their d9200? I'm now currently on the fence between these and the awkts as my closed back TOTL endgame replacement of my ether c flow 1.1s (which are currently using the eikon suedes).

Hi all! I'm not sure if this is the right area to ask, but I'm interested in hearing a detailed and direct comparison from people who have owned both the Ether C Flow 1.1s and 1 of (or more) the closed ZMF dynamics (Atticus, Eikon, Verite Closed). The reason I ask this is because I am unable...

I did think of that, but I’m not quite sure how to safely remove that tiny strip of kapton. Do you have any suggestions?

If anyone is interested, I am selling my Ether CXs in the classfields! It’s not that I don’t like them (they are pretty much my endgames), but I could really use the money at this time.

I just got some new cups for my Open Alphas, and as I was taking apart my existing Open Alphas to transfer the driver, I accidentally pulled the ground trace on one of my drivers, and it's bricked. I guess I have to go searching for another T50RP, but at least my previous one lasted over 5...

Thank you very much for your impressions, but I thought that Dan wasn't planning to make an upgrade to the Ether C Flows based off of the Ether 2 driver. So either there won't be an upgrade to the Ether Cs, or it will be something completely new!

Congrats and all the best for the new brand Dan! Not sure if this has been asked, but how does the aeon 2 sound relative to an alpha prime? I ask because the alpha primes is the closest headphone to the one I own, and am interested in a comparison.

What about the material and infill settings? And are you talking about the polish + paint setting with the black gloss color?

Ok I see. I think I am reprinting my cups for the mono 2.5mm jacks as well. What settings are you using on facfox for yours?

Is this the one with the hirose connectors, or the one where 2.5 or 3.5mm mono jacks can fit?

I̶ ̶j̶u̶s̶t̶ ̶p̶r̶e̶o̶r̶d̶e̶r̶e̶d̶ ̶a̶ ̶m̶a̶s̶s̶d̶r̶o̶p̶ ̶t̶h̶x̶ ̶7̶8̶9̶ ̶(̶i̶t̶s̶ ̶l̶i̶v̶e̶ ̶n̶o̶w̶ ̶a̶n̶d̶ ̶w̶i̶l̶l̶ ̶s̶h̶i̶p̶ ̶i̶n̶ ̶N̶o̶v̶e̶m̶b̶e̶r̶!̶!̶!̶)̶.̶ ̶H̶o̶w̶e̶v̶e̶r̶,̶ ̶a̶l̶l̶ ̶o̶f̶ ̶m̶y̶ ̶(̶c̶u̶r̶r̶e̶n̶t̶)̶ ̶h̶e̶a̶d̶p̶h̶o̶n̶e̶s̶ ̶a̶r̶e̶ ̶s̶i̶n̶g̶l̶e̶ ̶e̶n̶d̶e̶d̶,̶ ̶t̶h̶o̶u̶g̶h̶...

How do the nfb11.28 compare with the jds atom?

As for my case, I have modded t50rps and a 600 ohm dt 880. Is the nfb11.28 sufficient for both, or is the a100’s direct drive still the best?

should I get the a100 and a dac over a nfb 11.28?

I have a question: When you say 9-10 oclock on the volume dial, does 0% volume start at 12 oclock and 100%/max volume end after 1 full rotation? Also, is the volume dial on a logarithmic scale or is it linear? Thank you very much!

Does anyone have a comparison of the Argons to Open Alphas/primes? Thanks

Found it via Google Finland: https://hoved-fi.dk/viewtopic.php?f=12&t=6064 They even include another close up picture of the inside of the cups:

That is true, but when I did this over a year ago I was pretty impatient :stuck_out_tongue:

For me, I did not even paint my cups. What I did was a "controlled acetone vapor bath" First and foremost, I did all of this on my driveway so all the acetone vapor would go directly outside. For the vapor bath container I used a cooking pot and a stand to place the 3d printed parts in an...

Originally I had the same problem. What worked for me is adding in the foam gasket that came with your stock t50rp between the driver and the baffles.

Wow, that 3d printer must be very impressive! What kind of filament did it use? Since your cups are way better than my current ones, what price would you name if I may have you print some for me(just the left and right cups, not the baffle and rings)? As for the gold ring, I did the same...