Search results for query: *
  1. dakanao

    Drop + Ultrasone Signature X Headphones Discussion

    If you like a 25dB bass boost over the stock signature, you should just get different headphones at that point.
  2. dakanao

    Final Audio Design Impressions and Discussion Thread

    It's very hard to power because of redundant restricting of the driver vents inside the enclosure. If you remove those, they'll be very easy to drive and they become much faster, cleaner without losing bass quantity and they'll loose the slight 3-4khz edge they have.
  3. dakanao

    Norne Audio (Was: Norse Audio): Feedback & Impression Thread

    Which one has smoother uppermids and highs between the Hart cable and JS-16?
  4. dakanao

    Beyerdynamic DT770 Pro 250ohm Impressions Thread

    You can actually increase treble resolution by a good amount by removing the restrictor on the back off the driver.
  5. dakanao

    Norne Audio (Was: Norse Audio): Feedback & Impression Thread

    How does the JS-16 compare with the Drausk V2 18 awg in terms of upper-mids and treble smoothness, and bass impact?
  6. dakanao

    Sennheiser HD650 & Massdrop HD6XX Impressions Thread

    Does anyone else find the same with UPOCC cables vs good quality OFC like Mogami, or was this just in my case?
  7. dakanao

    Sennheiser HD650 & Massdrop HD6XX Impressions Thread

    I find UPOCC to sharpen the transients/give more of an edgy sound compared to regular 4 core OFC cables. Yeah separation, bass impact/tightness and details get better, but at the cost of smoothness.
  8. dakanao

    [New] Philips Fidelio X1

    Previous post was posted incomplete by accident, completed it now :)
  9. dakanao

    [New] Philips Fidelio X1

    So I've found tremendous potential in the modded Philips Fidelio L2 and my (since a few days) broken L1. The mods I did are simple, but take a lot of time and patience. It consists of putting micropore tape everywhere on the plastic surfaces on the front and backside, getting off the pin that's...
  10. dakanao

    Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc)

    By unrefined, do you mean the treble quality was harsher?
  11. dakanao

    Final Audio Design Impressions and Discussion Thread

    It (the whole line stock, only E4000 and E5000 can be modded to have sticker removed) has some harmonic resonances issues due to sticker damping on back of driver. This is not noticable with more open eartips and a right fit, but compared to a modded Sony MH750 (open backed and with sticker...
  12. dakanao

    Sennheiser HD650 & Massdrop HD6XX Impressions Thread

    I also tried all of SBAF mods and the CC driver mod. The SBAF mods mostly lower bass quantity, no matter which mod they don't get rid of the slight 4 - 5khz edge because the metal mesh is still there. It's physics, metal material = metallic quality. Tube amps lessen it because they lower attack...
  13. dakanao

    Sennheiser HD650 & Massdrop HD6XX Impressions Thread

    It certainly is for many. You can get roughly the same sound as tubes on typical solid state by doing the mod, for those wondering.
  14. dakanao

    Sennheiser HD650 & Massdrop HD6XX Impressions Thread

    Removing the silver screen and using micropore tape around the diaphragm perimeter (1 or 2 layers, depending on your preference) and felt tape around everything else in the baffle, makes them smoother, more bassy and more natural sounding. Gone is the slight metallic edge that was caused, by...
  15. dakanao

    Sennheiser HD650 & Massdrop HD6XX Impressions Thread

    Even better when you remove the silver metal mesh and replace it with felt tape :)
  16. dakanao

    Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc)

    I meant regular Spiral Dot tips aka EP-FX9, not the + version because that one and the ++ have a different material then the regular Spiral Dots. You could use other versions of Comply tips, as long as the hole in the tip is atleast as big as the nozzle of the MH750. I found T-500 in reverse to...
  17. dakanao

    Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc)

    Yes I tried other silicon tips on other IEMs, but I always found they add a metallic tinge to the sound compared to foam tips. You're right with the lifespan of Comply tips. If you want to try silicon tips, I found the regular JVC Spiral Dots to sound the most natural (least amount of metallic...
  18. dakanao

    Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc)

    Comply T-500 medium or large, depending on what fits you best. No it's the opposite, it's better in reverse because that way the tip won't cover the IEM nozzle when they're in your ear.
  19. dakanao

    Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc)

    For those that gave up on MH750/755 because they found them too shouty: if you remove the vent sticker in the back of the driver, all the shout is gone.
  20. dakanao

    Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc)

    It can actually be extremely pleasant if you remove the all vent stickers from the back of the driver, then use Comply foam tips in reverse. I've just started listening to them that way, and they're even more pleasant than stock Final E5000 and E3000.
  21. dakanao

    Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc)

    So I bought one today. Mine has the 2 solder dots and off centered driver vent. Interestingly, when I took off the vent damping, there were 2 vents in there.
  22. dakanao

    New Beyerdynamic Pro X line: DT 700 Pro X and DT 900 Pro X

    Which one would have more bass impact between DT770 Pro 250ohm and DT700 Pro X, when both have the same pads, foam discs and clamping force?
  23. dakanao

    Beyerdynamic DT770 Pro 250ohm Impressions Thread

    So I did some mods to these. My pair was pretty neutral on arrival with a distant midrange mild treble peak, certainly no boosted bass but rather linear until the upperbass dip. First I removed the plastic felt ring and the plastic tab on the driver magnet. Both are there just to restrict...
  24. dakanao

    AudioQuest NightHawk Impressions and Discussion Thread

    You can add a rubber band on the headband.
  25. dakanao

    Stacking magnets?

    So I tried a 15mm diameter magnet on my open back CAL, with rear sticker removed, in the attracted position. It made it less sensitive and less smooth, it was even worse in the repelling position. It got me thinking, wouldn't a potmagnet be best for this? It shields the outer layer of the...
Back
Top