Tofty's latest activity
-
Atfer seeing Tofty and Drago's 3D printed headphones, I figured I'd have a crack at a pair, which then has spiraled into a bit of an... -
Tofty reacted to cinemakinoeye's post in the thread What kind of solder for terminating cables? with
Like.
For making audio cables, I would recommend what I've been using for decades: 60/40 (Tin/Lead) rosin core solder, which is pretty much... -
What if the headband was inflexible, but there was a hinge before the yoke (similar to what an M50X has), and there was some kind of...
-
Thanks. Tbh, personally I don’t want to. But the lack of budget options made me think that way. That’s the last stage. If you could get...
-
Buy the metal bow from Beyerdynamic. It´s cheap and durable. This one i wouldn´t print.
-
The design is a headphone strap. I was talking about the headband. The metallic part(most of the time, bust there’s a few 3d printed...
-
Well, at first I thought the first one is a solid design & it can’t probably get so much better than that. But now I’m afraid that I’ll...
-
Angeled drivers? How do they sound compared to a flat design? I wanna try this for my next project. Angeled by 5-10 degrees with 5-10...
-
Thanks for the insight, I guess silicon is a good option. I would go that route since its forgiving and easy to work with.
-
Digikey is letting you place orders for the Peerless 50mm so I just bought 10. They are still back ordered though.
-
Tofty replied to the thread Tofty's DIY Headphones - 3D Printed.Thanks. Yeah there aren't really any short cuts, apart from taking a pre-existing design and modifying it, but even then I've found it's...
-
-
So my suspended design you basically put the driver holder into the larger earpad plate ring and attach a bunch of rubber bands around...
-
Do you have pictures of how the driver was mounted on to the headphone? I'm curious about swapping out drivers on a headphone. What...
-
Thank you for the detailed response. So it is about as time consuming as I imagined. Still hope to be able to get in on the fun at some...
-
Tofty replied to the thread DAC/Amp for MiniDSP EARS testing rig.Any suggestions? Otherwise I suppose I'll just get a ifi Zen DAC V2 or similar.
