-
-
SVery cool. I really admire your build. The tube front end is cool, as is the engraving (laser?) Thankfully mine is totally silent even...
-
SSatyrnine replied to the thread KG CFA3 headphone amp.I’m running 30v rails, and had noise from protector board regs as well. Solved it with 1k resistors between the 30v rails and the...
-
SSatyrnine replied to the thread KG CFA3 headphone amp.Great, thank you! I’ll see what I can do about mounting to side panel.
-
SIt’s probably fine, it would be more ideal to heatsink to the outside of the case but if the temps are fine it’s fine. I would pay...
-
SSatyrnine replied to the thread KG CFA3 headphone amp.Can I get away with this method of heatsinking for the grlvs? I plan on running 8ohm speaker loads. I admittedly have only tested with...
-
SSatyrnine replied to the thread KG CFA3 headphone amp.Your build looks amazing! For what it's worth, my 30v dual mono CFA3 Tube Hybrid was able to hit around 2.5v of input before distorting...
-
Smy CFA3 with both my susvara and 1266 abyss is fantastic on its own....FWIIW
-
SSatyrnine replied to the thread KG CFA3 headphone amp.Can any builders offer their input on my layout before I start drilling? Amp: Left or right? Input comes in the middle, so figured I'd...
-
SFinally ready to be shipped. Dukei also made an attenuator box to be used with sensitive headphones.
-
SHello everyone, I'm the new crew here, and I'm thrilled to be on board with all of you. Know about CFA3 by chance when researching DIY...
-
SSatyrnine replied to the thread KG CFA3 headphone amp.Thought I'd drop my progress on my Dual Mono CFA3 Hybrid here. Just a one-off for personal use. I'm a music electronics tube amp tech...
-
SProgress is going slowly mainly because of the slow shipping/handling in EU. GRLV and amp boards are done. Next up is to case it.
-
SSatyrnine posted the thread Kevin Gilmore Dual Mono CFA2/3 Build Thread in DIY (Do-It-Yourself) Discussions.Hello, Relatively new here. I'm mostly a guitar/bass tube amp tech/builder but dabble in HIFI. I'm building a CFA2/3 (not sure if I'll...
-
SSatyrnine replied to the thread New Member Introductions thread.New member here. Lurked for a while, now ramping up a Kevin Gilmore CFA3 build. I'm a small elec tech that specializes in tube gear for...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…