-
-
Following up with this. Finally had sometime to look into this and uninstalled all USB driver relating to other dacs and just a fresh... -
sajunky replied to the thread Denafrips 'Pontus' R2R ladder DAC - close up view.I would go with USB isolator first ($50-$100). Or two. It won't be wasted when you buy DDC later. See posts on the Douk Audio Poorman...
-
sajunky replied to the thread The Ethernet cables, Switches and Network related sound thread. Share your listening experience only..Common power supply ground, common shield cage. Makes sense. How you would provide two large shielding areas inside the same enclosure...
-
sajunky replied to the thread Douk Audio U2 Pro DDC - Poorman DDC for an affordable & clean digital signal.You can't put two Intonas in series, probably can't mix with chip-based isolators too. The original question was about two or more...
-
sajunky replied to the thread Audio-Gd R-28 impressions thread.There is a lot of high-end technology borrowed from the upper range (R-8 / R-27) in the R-28mk3. Main differences: - FPGA is not only...
-
sajunky replied to the thread Musician Audio Pegasus R2R DAC.How old is your Pegasus? First models were shipping with non-functioning I2S input. It was discovered only 6 months later, not sure when...
-
sajunky replied to the thread Denafrips 'Pontus' R2R ladder DAC - close up view.It is probably generic name for a Low-Phase-Noise-Oscilator, which means no-name low phase noise series. Expect performance slightly...
-
sajunky replied to the thread Audio-GD DI-20.For your DAC nothing. It is digital output S/PDIF signal, not voltage driven but current loop. Some other Audio GD DACs have compatible...
-
sajunky replied to the thread Audio-gd DI24/DI24HE.I can't comment on the clock quality of your DAC and there are other factors that can affect final jitter, including methods of clock...
-
sajunky replied to the thread Denafrips 'Pontus' R2R ladder DAC - close up view.I ignore your aggresive tone. I am sure one who looks for R2R DAC do not tolerate brightness in sound. The other parameters cited are...
-
sajunky replied to the thread Denafrips 'Pontus' R2R ladder DAC - close up view.OP gave a clue of preferences and a tube amp explains a lot as well.
-
sajunky replied to the thread Soekris Audiophile Line Dac's 2541, 1541, 1421, 1321, 1101.Also consider Audio GD R28 mk3. Fully balanced design starting from a ladder, galvanically isolated all ports, jitter-free asynchronous...
-
sajunky replied to the thread Audio-GD DI-20.It could be the same issue as with I2S. Clock frequency on the Harmony is out of locking range. It happens, Audio GD is right. In the...
-
sajunky replied to the thread Audio-GD DI-20.It looks compatible. I would check the following on the DAC menu: - Input selected - Input clock for I2S (internal/I2S), try both -...
-
sajunky replied to the thread Audio-gd NFB-28 .Few thoughts and tips useful in various situations. - WASAPI Exclusive access is blocked when some other application currently use...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
