-
-
NNiceStrongArm replied to the thread ETHER 2: Impressions and Discussion.Re T2, braided is not going to happen. Will most likely go with the Cablesforless; seems they can make it and at the price, nothing to...
-
NNiceStrongArm replied to the thread ETHER 2: Impressions and Discussion.Thanks for the recommendations. The T2 braided design I don't like, and sleeved is adding bulk and weight. Not cheap either! Sent a PM...
-
NNiceStrongArm replied to the thread ETHER 2: Impressions and Discussion.Can anybody recommend more lightweight & flexible cables for the Ether 2? I have no clue who sells third party cables with that...
-
NNiceStrongArm replied to the thread connecting integrated amplifier (pre-out) to headphone amp.Well, that was easy! If everything in audio would be so straight forward. I had a buzzing problem once, and after months figured out it...
-
NNiceStrongArm replied to the thread connecting integrated amplifier (pre-out) to headphone amp.I don't get any buzz on my headphones. If I understand you ok, then your headphone amp is the SMSL SP200, which is solid state, so there...
-
NNiceStrongArm replied to the thread connecting integrated amplifier (pre-out) to headphone amp.@ManuCV Yes, very similar, indeed. I have B&W CM6 bookshelf speakers on stands and also like the combo quite a bit. Rotel and B&W are...
-
NNiceStrongArm replied to the thread connecting integrated amplifier (pre-out) to headphone amp.You can turn the speakers on/off no problems with the front A/B speaker switch on the RA 1752. If you have a subwoofer as well, then...
-
NNiceStrongArm replied to the thread ETHER 2: Impressions and Discussion.Actually, I put a note with my order, which prompted them to call me. So the cart system is not automatic.
-
NNiceStrongArm reacted to Steve Wilcox's post in the thread ETHER 2: Impressions and Discussion with
Like.
Thanks for the clarification Dan. But please note that the source of the incorrect information seems to be your website which says... -
NNiceStrongArm replied to the thread ETHER 2: Impressions and Discussion.Why do you then sell me last week a package with Ether 2 headphones and VOCE pads? Ordered from you directly and even talked on the...
-
NNiceStrongArm replied to the thread Woo Audio WA6 + WA6SE: Tubes, Comments, Pictures, and Advice.Hmm, recently switched between WE422 and the stock rectifier, and the stock sounds pretty pathetic and dull. I would definitely try some...
-
NNiceStrongArm replied to the thread Woo Audio WA6 + WA6SE: Tubes, Comments, Pictures, and Advice.I don't know what the combo of Sophia Princess with your headphones will sound like with the 13EM7. For me with WE422 on Ether 2, in...
-
NNiceStrongArm replied to the thread ETHER 2: Impressions and Discussion.I just got the VOCE pads for the Ether 2, and the VOCE pads are listed as an accessory for the Ether 2 on the Dan Clark website "These...
-
NNiceStrongArm reacted to LCMusicLover's post in the thread ETHER 2: Impressions and Discussion with Like.
Yes, the rods are very resilient. Same was true of rods on EFO, but that wasn’t a issue because EFO wasn’t as tight.
-
NNiceStrongArm replied to the thread ETHER 2: Impressions and Discussion.Thanks for this. No problem trying that. I have all sorts of small tools for microscopy. I tried bending the rods, but they seem to be...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
