MattSPL's latest activity
-
i received today these totally cheap but apparently "audiophile" by the description fuses ->... -
I will next test to see how important it is to have the crystals touching the connector vs say with an adhesive like BluTack between the...
-
Crystals update... I believe that experience is gained by doing and this process is slow. I also believe that one can speed up the...
-
MattSPL replied to the thread DIY Ground Box Thread.I must try the cable enhancement wraps. I’ll see if I’ve enough minerals left.
-
Experimented a bit with these small crystals. It seems like they exhibit a resonant frequency which does effect what is heard. What is...
-
My recommendation for optimum performance when building ground cables (or anything to do with ground boxes), is stay away from solder...
-
MattSPL replied to the thread DIY Ground Box Thread.Thanks, I will give it a try, but need to order more cable, spades and banana plugs.
-
Works spectacularly from DAC to amp. I would say worth trying for your use case but no idea how will effect the performance until you...
-
MattSPL replied to the thread DIY Ground Box Thread.Yeah, really interesting all this ground box testing, but very time consuming. Do you think doing the cable mod on interconnect’s...
-
Good, you are starting to experiment and understand what the cause and effect is when something different is tried. Often what seemed...
-
MattSPL replied to the thread DIY Ground Box Thread.I won’t mix AC Earth with any signal ground. When I tried the AC Earth on the ifi AC purifier, I only had that connected to the Ground...
-
I am not sure exactly what you are asking. As a rule of thumb I only will mix components going to the same/one box if 1) total weight of...
-
MattSPL replied to the thread DIY Ground Box Thread.I have 1 pink quartz crystal about 1 inch diameter in each ground box. Seems to be a decent balance to the sound.
-
Having second thoughts on quartz chip bags -20 gm, one on top and one below input side of ground box. This changes the imaging - more up...
-
MattSPL replied to the thread DIY Ground Box Thread.@cdacosta Would you I have the 2 boxes connected together at the moment, with all the cables connected into the bigger box, giving...
