-
-
Back to the Spectroid issue...I downloaded a noise generator app, I can play white noise through the iMM-6 and an IEM (attached in an... -
if you ever attempt this again, spritz some water in the negative and shake out the excess. Then pour and cure. I use this process...
-
ForceMajeure replied to the thread Home-Made IEMs.I'll try, Thanks for the tip.
-
ForceMajeure replied to the thread Home-Made IEMs.I have tried to use Siraya tech's resin inside a colloid mold but it would stick to the colloid after curing and was impossible to...
-
ForceMajeure replied to the thread Home-Made IEMs.As a rule of thumb I always solder the wires to the female jack with the cable plugged. It helps dissipate the heat and reduce the...
-
I hv followed your way to do same, but I don't hv knowles 30095, I just used 31736 instead. I removed the cover with sandpaper, very...
-
ForceMajeure replied to the thread Home-Made IEMs.Yes, It will be ok, as long as the resin is not in contact with UV light. The older it gets the slightly longer it will take to cure...
-
I followed the guide here: https://www.roomeqwizard.com/help/help_en-GB/html/impedancemeasurement.html and made a few minor tweaks and...
-
ForceMajeure reacted to Dynamo5561's post in the thread Resistance of cables; pics, comments, and links with
Like.
Update on my list: Resistance in milliohm Length in meter Link Price (I bought for) Traillii Cable [PW Audio 1960s 4-Wire] (2,5)... -
ForceMajeure replied to the thread Ultimate Ears UE PRO 18+ Discussions and Impressions.You will not find these looking for the specs as these are not "off the shelf" drivers. Their model number starts with a 6xx meaning...
-
ForceMajeure replied to the thread Ultimate Ears UE PRO 18+ Discussions and Impressions.Knowles
-
ForceMajeure replied to the thread Home-Made IEMs.Ear impressions can keep their shape for 2-3 months and often more but it depends on the quality and type of the silicone used. Some can...
-
ForceMajeure replied to the thread The discovery thread!.These used to cost ~10-15$ from China as well a few years ago. The price went down and they can now be found for ~2-5$ before shipping...
-
ForceMajeure replied to the thread flinkenick's 17 Flagship IEM Shootout Thread (and general high-end portable audio discussion).I was just about to post that Indeed they pioneered the use of those shredded cf plates with flakes and even without any flakes Here is...
-
-
I still have to assemble the left side, havent listened at all yet, but what do you think about these curves? New project is blue and/or...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
