-
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.For headbands, you can look into Foster branded ones as well...they're not particularly cheap, but they're a 1 to 1 drop in replacement...
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.I always found the ripoffs (cheap Chinese stuff) sounded different and less comfortable than the originals. I also attached instructions...
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.You have to remove the earpad and its plastic ring it is attached on first. You can do this by pressing down on the earpad, and then...
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.Yes, it's unfortunate that originals can't be had anymore. I bought a pair of compatible ones many years ago, and they just don't 'feel'...
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.Excellent, thank you! Time to look for an authorized Fostex dealer!
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.Where are you still getting the old Denon earpads? The ones I have are starting to flake off quite a bit!
-
Darkblade48 replied to the thread Starving Student PCB's.I am pleased to report that the PCB I designed following Dsavitsk's updated schematic for using 12AU7 is functional. Please try to...
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.Probably obsolete by now; the headphones haven't been made in quite some time.
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.Unfortunately, the screw that is used to attach the earcup is one that is out of production (BISS2 is the reference number, see...
-
Darkblade48 replied to the thread Denon D2000/D5000, MD2000/MD5000 Thread!.Encompass might have the parts you are looking for; though I don't think they carry the headband padding (though that can be replaced...
-
Darkblade48 replied to the thread CMOY PCB ready-to-etch file wanted--Made my own!.What would be the advantage of having two TLE2426? I thought one should be sufficient. You might as well consider using a buffer at...
-
Darkblade48 replied to the thread CMOY PCB ready-to-etch file wanted--Made my own!.Lovely! What's the size of that board?
-
Darkblade48 replied to the thread CMOY PCB ready-to-etch file wanted--Made my own!.I haven't even checked to make sure the PCB traces are correct :), much less considering getting them fabbed. I'd assume JLCPCB would be...
-
Darkblade48 replied to the thread Skill required for a Bottlehead build?.I'm also a bit late to responding to this post, but I'm working on a SEX myself, and the instructions are very thorough. As mentioned...
-
Darkblade48 replied to the thread CMOY PCB ready-to-etch file wanted--Made my own!.Do you mean something like the above? Or were you looking for something that is more hand etchable friendly? My design mounts the...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…