conspibro's latest activity
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.Thanks for sharing. I'll have to test it out with my Sundara.
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.Anything that can provide 5V, like a phone charger. It can charge at 1.5A, so preferably get one that can provide 2A at least.
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.@LyuboA Not sure if you've tried this yet but I wonder if it will be the same observation on your unit. I noticed I could get around...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.That is what I needed to do too with some of my setups, other than the V3. I could adjust the preamp gain to 0.0 dB (i.e. no change) out...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.It is something like auto gain compensation (negative preamp gain) to prevent clipping. By the way, which output were you using in the...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.I know... (I was the one who shared that chat :sweat_smile:) Which measurements did you see though? I could only find this one (that I...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.Apparently someone measured it (see below; from 4PDA thread) and I assume the current and power figures are for a single channel. Not...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.As a sanity check, I tried connecting my unit to PC as a USB DAC (in direct access mode, not through Linux Pipewire), and also with my...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.My Sundara works fine with a DC04 Pro, and this is about the same ballpark, if not slightly more powerful. So I don't doubt it will be...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.It can go either way. Some do advertise that figure as per-channel , some are combined. It is all about technicality. You'll need to...
-
Cconspibro reacted to Ben86's post in the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS with
Like.
Tempotec replied to me that they are working on the new Firmware for V3 which should be released soon. I hope that they fix all these... -
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.Not gonna lie, I got this while crossing my fingers that it actually puts out 610mW per channel. But knowing "deceptive" advert claims...
-
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.Confirmation with regards to the stated power output specs. Combined total of both channels, not per-channel.
-
Cconspibro reacted to arutyun's post in the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS with
Like.
Greetings to everyone) Some thoughts and findings after few hours of using. First of all, my opinion won’t be interesting for... -
Cconspibro replied to the thread Tempotec V3 DAP - small, powerful, functional with Hiby OS.Thanks for the info; some parts did feel plastic to me, which is why I was wondering if there is aluminium somewhere because the unit is...