-
-
Basick reacted to Mellowship's post in the thread Loxjie P20 Discussion- Starved for information on this thing! with Like.It is tricky to insert socket savers on this amp, indeed. First time I tried, one of the saver's pins did not get right into the socket...
-
Basick reacted to Jonmakauu's post in the thread Loxjie P20 Discussion- Starved for information on this thing! with Like.I had the same issue with mine before, the socket saver is not properly pushed down if that happens, try swapping the L and R socket savers
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.Ahhh yes! That seemed to have done the trick! Thank you!
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.If anyone has used socket savers for their amp, does the one on the right stick up above the left one? I for one cannot push the one on...
-
Basick reacted to dougms3's post in the thread Loxjie P20 Discussion- Starved for information on this thing! with Like.Got my amp back from Keith today. Its a significant improvement. The SMSL SP200 is my standard for comparison since I've had it for...
-
Basick reacted to dougms3's post in the thread Loxjie P20 Discussion- Starved for information on this thing! with Like.I'll probably end up buying it too, I'm impatient and chose the tubes that had the fastest delivery time.
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.I ordered the 6N3P-DR's, seems like there was a general consensus on them
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.Anyone have any experience with these two tubes...
-
Basick reacted to JazzArtist123's post in the thread Loxjie P20 Discussion- Starved for information on this thing! with Like.@Basick, I'm unfamiliar with the SoundBlaster X-Fi you are using; however, when you say, it might help to know that typically when an...
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.Wow thank you for such a detailed response! Yes, I've tried running the setup single ended both ways, either connected to the DAC or...
-
Basick reacted to JazzArtist123's post in the thread Loxjie P20 Discussion- Starved for information on this thing! with Like.@Basick, You are probably close to getting your new SDAC working correctly. For example, your DROP Grace SDAC is only going to show up...
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.It looks like the manual is just wrong, he also had the same issue. So the balanced setup should be In1 and Out1
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.No it works with In1 and Out1 for balanced, I know that the manual says something different. Even looking at the back of the unit, the...
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.Am I right in saying that when using an external dac, you are bypassing the onboard audio? Therefore will not be able to use the Realtek...
-
Basick replied to the thread Loxjie P20 Discussion- Starved for information on this thing!.Am I supposed to have drivers installed? I'm thinking the sound just doesn't sound as good because my soundblaster x-fi MB3 isn't...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…