Aldo40's latest activity
-
AAldo40 replied to the thread Home-Made IEMs.I solved this problem by holding the intra through the holes of the nozzle, I no longer have concerns about removing varnish at the hole...
-
AAldo40 replied to the thread Home-Made IEMs.excellent :wink: results similar to brushing :wink: I gave up the airbrush, I don’t have time to learn how to adjust the gun ;( then I...
-
AThis is what a properly sprayed one should look like. This is already cured. If you do a great job with spraying, you won't actually...
-
AAldo40 replied to the thread Home-Made IEMs.2.2µf it's good for EST, the bump at 2.5khz is difficult to remove even with 0.47
-
AAldo40 replied to the thread Home-Made IEMs.For filling the best solution is the optical silicone, one can reshell without damaging the drivers. This provides better sound...
-
AAldo40 replied to the thread Home-Made IEMs.The center solder plug of 22955 is open so you cannot fill with resin otherwise you will drown the driver. The resin filling is valid...
-
ADreve materials will turn yellow. Regular Clear will be almost brownish yellow after post-curring and lacquering, we switched the moment...
-
AAldo40 replied to the thread Home-Made IEMs.Cool ;)
-
AOye bois By the way I have retired myself from building iem because i cant afford it :) Though you guys can throw any doubts on me i...
-
AAldo40 replied to the thread Home-Made IEMs.personally I leave rested the resine detax feeeprint at least 30 minutes the time the bubbles rise to the surface and then I launch the...
-
AAldo40 replied to the thread Home-Made IEMs.Oui c'était décidément du super matos il y a quelques années avec ses inconforts, je trouve l'histoire du changement de bacs naze, c'est...
-
AYeah that's the disadvantage of Asiga, it adds completely unnecessary costs. Rapidshape doesn't have such limits. Speaking with...
-
AAldo40 replied to the thread Home-Made IEMs.So it’s this kind of parameter that drew me to asiga but in real life it’s a bit more complicated I find, I put the files for freeprint...
-
AAldo40 replied to the thread Home-Made IEMs.I own an Asiga pro 2 and a MARS 3 and the Mars 3 has nothing to be ashamed of;) The tray of my pro 2 is huge and the noise of peeling...
-
AAldo40 replied to the thread Home-Made IEMs.for the transparent resin the NOVA3D ultra transparency and one that remains the most clear. it is not easy to print it needs good...