Aldo40's latest activity
-
AAldo40 replied to the thread Home-Made IEMs.hello this is the method used by detax, earsonics also ;)
-
AAldo40 replied to the thread Home-Made IEMs.. For a fair zobel, the best way is to measure the impedance of the driver, the recorded in ZMA file and simulated the zobel in a soft...
-
AAldo40 replied to the thread Home-Made IEMs.Yes resistance // maintains impedance and serial resistance varies gain
-
AAldo40 replied to the thread Home-Made IEMs.Hi Arski, You didn’t put serial resistance on the 33AJ? And what capacitor value did you put on the 33Aj? I don’t want to discourage you...
-
AAldo40 replied to the thread Home-Made IEMs.This does not affect the sound as much as the damper for example
-
AMy super hero turner is a CHAMP if you shake off enough after a dip OR after an airbrush application.
-
AAldo40 replied to the thread Home-Made IEMs.So I’m showing an example of a machine that needs to be done. I’m a little ashamed of published mine which is also a DIY assembly with...
-
-
AAldo40 replied to the thread Home-Made IEMs.@tablo80, I dip the shell and then I turn it in a turnstile under the UV .
-
-
AAldo40 replied to the thread Home-Made IEMs.On clear resin 3D shells and contrary to the traditional method, if you want to have a smooth rendering, you have to sand the inside of...
-
AAldo40 replied to the thread Home-Made IEMs.To sand the inside of the shell, I use this tool for Dremel, I can’t remember what it’s called. C is like a split arrow for sticking...
-
AAldo40 replied to the thread Home-Made IEMs.Probably 2XCi 22955 and 1x 2389
-
AAldo40 replied to the thread Home-Made IEMs.
-
AAldo40 replied to the thread Home-Made IEMs.On 3D printing with clear resin, to have a look like glass you had to sanded and varnish all the inner and outer hulls, you can dip the...
-
AHeres a community PSA: Be wary of the drivers on aliexpress coming from the Langhizheng store. The QC seems spotty at best. Ive had...
-
AAldo40 replied to the thread Home-Made IEMs.when you look at the doc sonion, it’s very well done the shema, you can’t go wrong, the connectors + are rated vent as Piotr said, on...
-
