Recent content by akatsuki
-
Want To Buy ZMF Atrium Opens in highly figured wood and Magnesium frame
- Price
- 0.00 USD
- Condition
- Excellent/Like new
- Negotiability
- Or best offer
- Ships to
- United States of America
Looking for ZMF Atrium Opens in a wood with a lot of character, like the Camphor Burl or the current Zebrawood offering... Let me know if you have one sitting...- akatsuki
- Listing
- Comments: 1
- Category: Full-Size
-
The TWS + Neckband + BT Cable Adapter Thread
I have been using the BGVP M2 and M3 for a long time, they work pretty well. I even tried them with my 64Audio U12ts when I had those and they were pretty good. Currently using the M3 with Truthear Hexas and the M2 with Simgot EM6Ls. The M3s don't seem to be multipoint, but the M2s are, so that...- akatsuki
- Post #505
- Forum: Portable Headphone Amps
-
Boom mic like v-moda Boom Pro but with double-ends
I want to use my nice headphones for work calls sometimes. Would love something like the V-moda boom pro, but that had a split cord for my headphones which have dual 3.5mm jacks instead of one-sided. The Antlion runs a cord the whole way, which kind of sucks. Any recs?- akatsuki
- Thread
- Replies: 0
- Forum: Cables, Power, Tweaks, Speakers, Accessories (DBT-Free Forum)
-
For Sale Verum 1 Mk 2s
- Price
- 275.00 USD
- Condition
- Excellent/Like new
- Negotiability
- Or best offer
- Ships to
- North America
II have two sets of these, so selling one pair. These are pretty amazing for the price. Price includes fees and shipping CONUS- akatsuki
- Listing
- Comments: 0
- Category: Full-Size
-
For Sale Nan-6 headphones
- Price
- 350.00 USD
- Condition
- Excellent/Like new
- Negotiability
- Or best offer
- Ships to
- North America
Barely used Nan-6 planar headphones. These are a bit esoteric source, made by one guy in China. But basically a low sensitivity HE-6 with superior build quality. Price includes shipping CONUS- akatsuki
- Listing
- Comments: 0
- Category: Full-Size
-
64Audio U12Ts
- Price
- 1350.00 USD
- Condition
- Excellent/Like new
- Negotiability
- Firm
- Ships to
- North America
U12Ts with box and apex modules and everything you see in pictures. Shipped CONUS insured. I’m just out of the hobby now and never use these since they are too “nice”. Had them cleaned by 64Audio so they are mint.- akatsuki
- Listing
- Comments: 2
- Category: In-Ear Monitors
-
Tofty's DIY Headphones - 3D Printed
Digikey is letting you place orders for the Peerless 50mm so I just bought 10. They are still back ordered though.- akatsuki
- Post #76
- Forum: DIY (Do-It-Yourself) Discussions
-
Tofty's DIY Headphones - 3D Printed
So my suspended design you basically put the driver holder into the larger earpad plate ring and attach a bunch of rubber bands around the perimeter. Then the clamps go into the gaps to close the rings off and provide structural support. I just ordered some drivers from Digikey so when I get...- akatsuki
- Post #73
- Forum: DIY (Do-It-Yourself) Discussions
-
Chinese / Asian Brand Info Thread (On or Over Ear Headphones)
I can’t get that planar link to work. It is the Nan-6 right? I want to buy one.- akatsuki
- Post #6,970
- Forum: Headphones (full-size)
-
Tofty's DIY Headphones - 3D Printed
Yeah - I am sure there are lots of ways to do this decoupling, this is all for fun for me.- akatsuki
- Post #69
- Forum: DIY (Do-It-Yourself) Discussions
-
Tofty's DIY Headphones - 3D Printed
Anyway, here is the draft version of my suspended driver design. Definitely not refined to any level but just as a test case. I would also need to add yoke mounts. https://www.tinkercad.com/things/kfLf5F9b2Bg- akatsuki
- Post #67
- Forum: DIY (Do-It-Yourself) Discussions
-
Tofty's DIY Headphones - 3D Printed
For me I don’t have any measurements at all. I basically took another design and mostly maintained the driver distance and left it alone. I spent some time thinking about how to design a driver test rig. You would be able to slide the driver forward and back as well as adjust how open the...- akatsuki
- Post #66
- Forum: DIY (Do-It-Yourself) Discussions
-
Tofty's DIY Headphones - 3D Printed
wWouldn’t the issue with the suspended driver be an issue with shockmount microphones? Since that is sort of the model I am copying. And it would be suspended by rubber bands pretty tightly. Shouldn’t be too much motion. I suppose bass might cause some slight back and forth movement.- akatsuki
- Post #64
- Forum: DIY (Do-It-Yourself) Discussions
-
Comment by 'akatsuki' on listing '64 audio U12t'
I sent a PM a few days ago. This still available?- akatsuki
- Comment